Quoted from Aniraf:I’ve run a switch test, which doesn’t show anything out of the ordinary and coil tests that work perfectly.
So when you run the switch test and operate all the switches by hand they all work including the coin mech switch?
You're currently viewing posts by Pinsider wayout440.
Click here to go back to viewing the entire thread.
Quoted from Aniraf:I’ve run a switch test, which doesn’t show anything out of the ordinary and coil tests that work perfectly.
So when you run the switch test and operate all the switches by hand they all work including the coin mech switch?
Yes. Check the Green/Brown wire, that's your column wire, and whichever coin mech(s) are not working (white wire with a stripe as shown on the left of the switch matrix diagram) They could be broken where stressed at the coin door, or possibly broken at whatever switch they are daisy chaining from. The switch itself could be bad, so momentarily grounding the column to row switch should register a coin if the wiring is good, so you might check that first.
Untitled (resized).pngYou're currently viewing posts by Pinsider wayout440.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/scorpion-not-coining?tu=wayout440 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.