Eye of the tiger has several problems to work out

first is startup issue
finally got the credit button to work
Start relay pulls in score motor 1/3 turn stops
Looks like one of the S relay contacts is not holding itself on to fire the AX reset relay?
If I pull the AX relay with the Start relay it will let you play ball one all day but several functions not working
There is no reset of drop targets
and many other issues but trying to work on one at a time

Am I on the right track with the startup issue?

Eye1 Relay S (resized).jpg

Eye2 Relay S (resized).jpg

using credit button or coin:
start relay pulls SM does a 1/3 turn that's it

So....I try when start relay pulls, I manually pull AX and I see the player unit partially resets,
score reels partially reset then kicks a ball out to shooter lane
No drop target reset at all
all targets score, chimes work, bonus counts up and down...……. NO player unit action at all
Ball stays on player 1 forever

In this stage:

CX is energized
TX is energized
R is energized

and that is about it

I have come a ways on it from where it was......Just want to get it to start without having to manually pull the AX first

Yes it does

I will check this......I am (always have been) confused about the stack switches in back P1E....P2E etc Do you just go by wire color to find what you are looking for?

OK...…….found that the "U" relay had a burned coil (see pic) which cured several issues!
cured my drop target resets, ball count etc
Now:
I am down to the game starts...……. but in 2 player every time
The score reels wont totally reset, (its like it isn't allowed enough time) but score motor stops and game will start and play with existing scores on reels

relay (resized).jpg

Ah OK I don't have the manual for this game to see the player unit switches.
So where are these switches above located?
The 10, 100,1000,10,000 switches etc

Ok HowardR...….got everything working thanks to your direction.
2 player issue was in the CX relay not adjusted and after going thru the score reels again and again they are all resetting!!!!
Machine currently working 100%