Any Scared Stiff owners had trouble when two balls end up in the spider hole? Mine won't kick the ball out because the one on top of the other adds enough resistance to hold it back. Only solution is to remove the glass and pull one out by hand. Has anyone seen this problem and figured out how to fix it?

Here is my attempt at the skull topper. Oriental Trading skulls, a bunch of lamp sockets, some flickering tea candles, and a few extras.

IMG_7839.JPG

IMG_7840.JPG

IMG_7858.JPG

I am looking for someone that has installed the light up coffin decal. Where does it connect to? The installation instructions with the decal are not clear. Also I removed the coffin lid to replace it. There is a tiny spring under it. I did not notice how that spring is positioned when reinstalled. If someone has a chance to look under the coffin lid at the spring would you please try to describe or get a picture of which way it goes?

Does it stop at all when the flippers are pushed? Where does the spider point when the game is first started? The spider stopping on mine is a bit of a timing issue. It kind of drifts maybe 2 items before it stops once the flippers are pushed. What exactly is yours doing?

Have tried running "wheel Test" T.16? The problem is isn't doesn't say much about what makes the test pass or fail. I had trouble with mine and found several threads dealing with the spider circuit and the motor. I'll see if I can locate them and point you to them. I have a long write-up that I saved that explains how this thing works. I'll try to pm it to you or maybe I'll need email to attach the file.

Here is the thread

https://pinside.com/pinball/forum/topic/scared-stiff-spider-motor#post-4981707

If you need to replace the motor here is what I used and it worked perfectly ($15)

https://www.sparkfun.com/search/results?term=9238

Shouldn't the home position of the spider pointer be at 1 o'clock?