Scared Stiff
Bally, 1996You're currently viewing posts by Pinsider n1teowl.
Click here to go back to viewing the entire thread.
I just picked up a Scared Stiff and did a little research on it. It seems to have some of the features of a sample, including glow bones and the sample playfield (with the different face on the stiff-o-meter, "saved by the spell", etc.) It doesn't have the unscratched cabinet or boogie men extensions. Any idea how many of the samples are out there and why this one might have only been a partial sample?
Thanks!
Quoted from Reality_Studio:Does your playfield have a date on it? Curious how much earlier it was compared to the shipping versions. Here's the date on mine.[quoted image]
Hmmmm... No date anywhere on playfield. Here is the only marking.
20191109_110309 (resized).jpgQuoted from Reality_Studio:Does your playfield have a date on it? Curious how much earlier it was compared to the shipping versions. Here's the date on mine.[quoted image]
Cabinet says it was built Aug 1996.
Quoted from KrustyBurger:I don't know how many samples are out there either, but I also have a partial one. (Identical to what you describe)
Cool, thanks for letting me know. Interesting that there are so many versions of this game.
Quoted from ccbiggsoo7:care to share the red paint you used?
I used Createx red as a base and very small amounts of yellow and white.
20191212_195331 (resized).jpgQuoted from MiamiRedSkin:well that’s a bummer. Mind snapping a picture of your setup? I assumed the spring had to wrap around the hinge pin, but open to any other offer besides cutting it off
No, you have to cut it off I'm afraid...
I have an issue that I'm having a hard time figuring out. The spider wheel works fine most of the time, but occasionally it will continue to spin a bit past the point when you hit the flippers. If you hit the flipper at Double Trouble, for example, it will light up. The problem is that sometimes the spider will continue past that point. Sometimes a little bit, sometimes a lot. The light and the pointer don't match up when this happens. Any ideas on what might be causing this? Thanks.
Quoted from n1teowl:I have an issue that I'm having a hard time figuring out. The spider wheel works fine most of the time, but occasionally it will continue to spin a bit past the point when you hit the flippers. If you hit the flipper at Double Trouble, for example, it will light up. The problem is that sometimes the spider will continue past that point. Sometimes a little bit, sometimes a lot. The light and the pointer don't match up when this happens. Any ideas on what might be causing this? Thanks.
Also forgot to mention that everything works fine in test.
Quoted from n1teowl:Also forgot to mention that everything works fine in test.
In case anyone else has this problem, I reflowed the connectors on the spider board and everything is working fine now.
You're currently viewing posts by Pinsider n1teowl.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/scared-stiff-clubmembers-only?tu=n1teowl and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Ontario, CA