Quoted from GKW:The information that I am looking for is not in the manual. I have been through every schematic in the manual and there is nothing specifically for the back box lamp door, unless I somehow missed it. I saw nothing for the flashers: wire codes and connectors. Yes, I looked at the chart with the flashers and it didn't show anything that was helpful. Maybe if someone could take a picture of the flashers (for wire color) and their associated connectors (where do they connect)? Thanks!
You mean this?
stiff_flasher_insert_wiring.jpg
It shows the wiring (connections) and wire colors. The RED-WHT is the voltage (supply) and wired in parallel (daisy-chained). The BLU-XXX and BLK-XXX wires are the drive wires.
Quoted from GKW:From what I gather in the first picture, on the flasher at the top right of the board, it is daisy-chained to the lower right flasher (red/white wire).
It appears that these are the only two flashers that are daisy-chained, correct?
I see four #89 bulb sockets in one of those images. All the #89 bulb sockets have two lugs. One lug is the daisy-chained RED-WHT wire. The other lug is the drive wire. There is a single supply wire with FOUR connection points. There are four drive wires (BLU-RED, BLK-BRN, BLK-RED and BLK-ORG) with one connection point.