Im thinking this is the thread to ask, where can I get some dancing boogie men?
I purchased my set from Mark this past October.
http://www.freeplayamusements.com/boogie.htm
(Topic ID: 29319)
Linked Games
Scared Stiff
Bally, 1996
Topic Gallery
You're currently viewing posts by Pinsider bronzelion.
Click here to go back to viewing the entire thread.
2 weeks later
Quoted from herg:WOOHOO! I'm officially a member. My girl could use a little attention, and I can't find these plastics that go in the backbox:
I need the one with the "peeking monster" not the TV, but I'm not sure which is which
31-2582-1 scrnd-plastic island
31-2582-2 scrnd-plastic island
Also,
31-2587.2 scrnd overlay-insert panel
My SS needs the same. The one I have is cracked in several places and apparently glued in place on the posts.
Quoted from herg:I sent Planetary a request to make them, but I don't suspect it will be any time soon. If everyone who needs one sends them a request, maybe it could happen sooner.
I also sent an email request to Planetary for the three plastics behind the translite (2 floating 1 attached), and received a response from Rick that said that there's a chance they will reproduce them, but probably not high on the list as he has never had a request for them. So if anyone else needs those pieces you may also want to send an email to planetary.
Quoted from haunted1:You might want to check with Illinois pinball.com. He seems to have a lot if stuff not on his site.
Thanks - will check it out.
Freeplayamusements . com sells dancing boogie men but not sure about the other pieces.
1 week later
Quoted from bigdaddy07:I will achieve this someday.
+1. I haven't gotten it yet either, but someday it will happen!
1 week later
Hey SS owners, I need a little technical assistance, so I will ask you guys first. My SS pin didn't have a door plunger for the crate, so the ball always enters. I ordered a new plunger (04-10493) from Marco Specialties, but the part seems way to big to fit in the bracket (01-14277). Can anyone measure the fat portion of their plunger on their pin for me? It measures about 2.3 inches long (see photo) on the plunger i received. I think that fat portion needs to be at least an inch shorter to fit inside the bracket with the spring just above the coil or perhaps i am missing something?
Unbelievably I figured it out! A portion of the old plunger was sheared off and still stuck in the middle of the coil. I removed the old piece and now the new part now fits perfectly.
Ummmm...I am going to have to disagree with SS and TZ having the most mods. I believe TAF has the most mods.
1. Metal Safe
2. Metal Phone
3. Metal Train
4. Metal Knight
5. Polar Bear Rug
6. Uncle Fester Plunger
7. Cousin it figurine
8. Brick Backpanel
9. Thing Box Decal
10. Limo Mod
11. Light mods for Swamp kickout, Vault, Bookcase, and Electric Chair Kickout
12. Bookcase Decal
13. may not count but sometimes i have seen the TV mod from TZ and SS in there also
I better go play a game or two on Quoted from ctozzi:I finally got my SS today, I didnt have much time after work but I did install the Laseriffic topper. Thanks Again SPFXTED !
Nice addition!
Quoted from Rick471:I'm outta the club fellas, be back soon!!
Ahh that is too bad! I just heard today that Ted and Ctozzi were going to get leather elvira jackets for everyone! 
Promoted items from Pinside Marketplace and Pinside Shops!
Red Oak, TX
You're currently viewing posts by Pinsider bronzelion.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
