I'm hoping for a bit of expertise to tackle an issue with the balls not always ejecting properly from the coffin. Weirdly enough, the problem only seems to be with the last ball and occurs either when I get the 3 lock multiball or the machine is trying to clear multiple balls from the coffin after the game has ended. The ball shoots up but doesn't usually make it out of the coffin...its close though. The first few balls have no issue. I found the following service bulletin and was curious if anyone has encountered this issue and how they've fixed it. Would love a pic or two as that is always really helpful. Here's the service bulletin:
"If the game clears multiple balls but has trouble with the last ball, the eject plunger and coil need to be aligned with the tube leading upwards in to the coffin, most often this is solved by adding a thin washer between the top coil mounting bracket part# 01-9794 and the popper assy. weldment part# 04-10349, alternately the washer can be added to the lower coil mounting bracket to move the plunger the other direction if necessary"
Thanks in advance for your help!