Sure Amendes. Check back in a couple of hours. I'll take a couple of pics of that area when I get home from work and post them here.

Edit: Hey Amendes, I found one picture that I posted earlier in this thread showing an early production apron that my machine has. In this picture you can see the right anti-bounce back bar. You can see it mounts in the holes you were questioning.

SS_anti-bounce_back_(resized).jpg

Yeah, got it! Thanks!

My EatPM and my TotAN also have these anti-bouce back bars.... I just took another look at my SS and I could only spot the holes on the remote control, there are no holes under the flipper bats...

BTW, that early production aprons with the spiders are great. Someone was selling these stickers (just the spiders) at ebay a few years ago, but shipping to Brazil was too expensive.

Hey fellow pinners i recently purchase a mint SS and im looking for a topper for it. Any ideas or pics of toppers? TIA

You may find some nice ideas thru this thread!

Thanks amendes yeh looked through all 40 pages but all I see is skull toppers just wondering if there was someone else making something different. Id like the elvira slot topper if anyone has one? Cheers

Hi..I have a couple of small issues with my SS..when the ball goes down the right drain lane (telepathetic power)..I now only get the spot skull everytime..also the right popper /bumper sometimes fires randomly..any ideas anyone ?
Thanks.
It appears not many other SS s have done this counting on the replies

Hello, i need some help on what bracket i need. The hole next to the crate quit sending up balls when i opened up the machine it appears the bracket holding the coil broke i tried to buy these http://www.pinballlife.com/index.php?p=product&id=1840 but they were to small i am assuming this might be it http://www.pinballlife.com/index.php?p=product&id=3564 but wanted to ask before i bought again.

Thanks

20160114_192849_(resized).jpg

20160114_192903_(resized).jpg

20160114_192925_(resized).jpg

Slightly Off Topic:
My wife is selling her
beautiful B.C. Rich Warlock Elvira "Mistress of the Dark" limited edition series electric guitar.

Guitar is in beautiful (un played condition) with no scratches, dents, dings absolutely beautiful, in fact the protective coating is still on the cover on the back of the guitar..

These guitars were released by B.C. Rich in partnership with Queen B Productions in 2001.

There were only 300 of these guitars released, this beauty is #87.

Guitar comes with Certificate of Authenticity, original guitar strings, original velvet lined Coffin guitar case, that was sold separately at that time.

Coffin case velvet lining in excellent condition and very good condition on the outside.

This guitar was purchased as a collector item, never played, guitar has been stored away in Coffin case from day one.

Bolted on neck construction

String through body

Rosewood fret board

Bat inlay at 12th fret

6 Black chrome BC Rich sealed tuners

2 BC Rich hum buckers

1 black chrome volume control

2 black chrome tone controls

1 black 3-way toggle switch

Silkscreen Elvira image

Hard shell Coffin Case included.

PM me for more details.

s-l1600_(2)_(resized).jpg

s-l1600_(resized).jpg

s-l1600_(1)_(resized).jpg

Did the whole bracket break, or did the opto sensor break? I just replaced my opto on that same hole a few weeks ago. The ball broke the led right off the board. It's hard to see from your pics. It's blurry.

What do you guys think about it?

32e5f1_26812041b9044bb48ac7d886553469de_(resized).jpg

I like it a lot! Any pics of it on a game?

That looks cool, but wouldn't the "Bally" logo on the speaker panel cause a wrinkle/bump in the decal? I also think the top corners of the legs need to be removed from the image.

No... I was thinking the same....

hehe.... I haven't noticed....

BTW, that speaker panel is being made by a friend of mine... he asked for my opinion and I decided to share it here.... I'll pass on these feedback!

I would by one right now!!

I'm thinking about ordering one for me, but I guess it's coming quite costly (about US$ 150.00 + shipping)!

Is it listed for sale?

Nope, the speaker panel is being made by a friend of mine here in Brazil.

So where did $150 come from ?!

His price! - He ain't got a webstore....

I finally fixed my crate problem by installing a new auto eddy board went in very easy and works well, I do wish all the screws lined up but oh well, I figured id take a few pictures of the machine without the glass. I have had it since November buts its still looking pretty good. I added a bunch of extras skull lights, flickering candles, light back panel, black mirror blades, monster over light lock, plasma mod, lighted eyeball shooter, dancing boogie men, color dmd, black powder coat, cliffys, purple spider hole led, leds throughout. It has the original silk screen cab and back box.

20160130_133025_(resized).jpg

20160130_133053_(resized).jpg

20160130_133100_(resized).jpg

20160130_133121_(resized).jpg

20160130_133135_(resized).jpg

20160130_133246_(resized).jpg

20160130_152905_(resized).jpg

20160130_152858_(resized).jpg

20160130_152846_(resized).jpg

Aaah. I missed hat it was a local deal. If he sold them for 1/3 that amount, he could probably sell quite a few.

I see, but unfortunately, here in Brazil this is the price.... BTW, here's an updated version!

Speaker_Panel_SS_(resized).jpg

Looks good. Perhaps one day i can pick one up for the SS that i dont have yet...

The updated version looks better with the "legs" removed, but the flipper button should be taken off too, also this looks like it was modeled off of a faded cabinet as the green is off in color and probably the red too...

Just some items noticed..better now then after full production.

Very sharp mick, indeed the colors are from a faded cab. Recognize those colors everywhere.

I'm in the club. Long time coming.

20160131_122414_(resized).jpg

Hi how do i purchase? Thanks

Nice line up. I use to have the exact same one, and then I did something stupid, I sold my Creech.

Does anyone have the PinSound board installed on a SS? I've just watched the wonders this sound board does to TZ and TAF, but could not find SS anywhere....

Just joined because I finally found a SS project. Mine like many has the trap door issues . Looks like an interesting hack was done, but I am trying to get it right. Does anyone have a good pic or set of pics of this ramp as it relates to the BB ramp? I have a new BB ramp and am trying to see how to make a part for the trap door since it appears they are not available. Or does anyone have a link to someone who is making repros?

Any help would be greatly appreciated and glad to be here.

I'm in.

image_(resized).jpeg

My best, most loved, most beautiful pin!

20150405_110624.jpg

Anyone install the new Spider Plastic to the back box light board? I plan on applying mine new one soon and wanted to know if anyone has applied one and what they used to apply it? Glue, double sided tape, etc etc.
Originally they were glued on but what a pain to get removed from the board.

Thanks for any ideas for application.

"new Spider Plastic"?

Ya, I'm in. it needs a good shop job..

20160304_163602_resized_(resized).jpg

Hey Amendes..."New Spider Plastic"... It is the flat panel plastic that attaches to the swinging board inside the back box, the swinging board with GI lighting and some flashers attached. The arm from the spider motor goes through the middle of it and many of the original plastics are are cracked. Make sense?

I have replaced mine. You need to use 3M 77 spray on. http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Products/~/3M-Super-77-CA-Multi-Purpose-Spray-Adhesive-Low-VOC-25-Clear-Net-Wt-18-0-oz-12-per-case?N=5396314+4294874862&rt=rud

Ensure you have clamps for the corners and put some books on the top to keep it down. It works great.

Cool....Thanks. I just sanded my board down yesterday and am ready to install today. Will give it a shot.

No problem. Just be liberal with the spray in the corner areas, they tend to lift. Had to redo one of my corners twice.

Game blades installed

image_(resized).jpeg

image_(resized).jpeg

Thank you for posting the blade pics.

Restoring a SS now...will post pics once finished....all I need is to build a rotisserie, anyone got some good plans for one?

Sweet! Thanks for posting these. I'm considering getting them too. Can you also please put up a few pics with more light (daytime or room lights on), and also maybe a players view?

Just curious how the side art colors blend with playfield colors. They look pretty cool!

I'm starting a restore as well here's a threat on Rotissesries

https://pinside.com/pinball/forum/topic/vids-quick-and-dirty-rotisserie-guide

These were taken in lower level game room with no windows and lights on colors match well buy them you won't be disappointed

How's your backboard panel?

I did my own custom bb panel
Skull heads

image_(resized).jpeg