Announcing our WPC-95 Lighted Speaker Panel. We are planning on having Scared Stiff, Medieval Madness, Attack from Mars and Monster Bash panels on display and ready for sale at Texas. We will have other WPC-95 panels after that.

The WPC95 panels will come with panel, speaker grill, DMD plexiglass, attached graphic, power tap, full RGB remote control for speaker lights and panel. This panel is pictured with stock speakers (the midrange and tweeter.) You can use either stock DMD or ColorDMD, and either stock speakers or aftermarket speakers.

Install is easy. Comes with power tap, that gives power to speakers and panel. Change 2 of the pegs that hold the original panel in place, transfer your DMD and speakers to new panel and your done. You DO NOT have to remove those ¼” push nuts on your original panel, we replace everything you need so you don’t have to deal with those.

This is our 3rd generation panel, and our third-generation panels are perfect, FINALLY! All of our WPC-95, WPC and Stern DMD panels are 3rd generation except to Funhouse, STTNG and Indiana Jones: A pinball adventure. We hope to have Stern LCD and Data East panels within a few months.

We decided to make the speaker holes smaller then original but the do have the original panel shape.

These are not Genuine Bally/Williams product, so they are not a perfect match to existing game, but follow theme.

We also sell Lighted Speaker Kits for your original WPC-95 panel for either stock or aftermarket speakers.

This panel is a prototype, and the product model will be slightly different. The Scared Stiff panel is in No Good Gofers, because I do not have a Scared Stiff, but they use the same WPC-95 sized panel.

Dan
Lightedpinballmods.com
0224191224_resized (resized).jpg0224191224a_resized (resized).jpg0224191224b_resized (resized).jpg0224191225_resized (resized).jpg