I'm nearly finished with restoring my JP and have moved on to SBM while we get some have plays on JP before finalizing it.

I purchased SBM with the thought of having some fun with restoring it and I really like the artwork. A fellow Pinsider was selling a fully functioning game with new CPR playfield.

Here are some pics before I started. Playfield a bit worn but I have a new CPR. Cabinet pretty good but I plan to paint it anyway. We played the game for a few months to make sure everything worked. I put LEDs in to make sure they worked fine too.
IMG_20181006_124607 (resized).jpgMVIMG_20181006_123837 (resized).jpg

Old playfield at disassembly.
IMG_20181006_123826 (resized).jpg
IMG_20190102_195519 (resized).jpg

The CPR playfield was not as smooth as I'd like so I cleared it with some Spaymax 2k.

Sorry, I don't have any before pics. The clear was very thin, sunken circles around the inserts and you could see the grain. After a scuffing with 1000 grit, the clear issues were very apparent. It looked like a lot of dry spray and very patchy.

IMG_20181226_162856 (resized).jpg

I plan to add some color to the cabinet. Here are a couple concepts that I'm working thru...
NoPink (resized).JPG

My artist kid says no to the pink..
Pink (resized).JPG

Front...

Thoughts on the color addition?

I have a large vinyl cutter and some Oramask and plan to create the masks myself.

Slight improvement...
IMG_20190102_200600 (resized).jpg

IMG_20190115_220354 (resized).jpg

Thanks for the feedback.

So far,

1 - Original
1 - Pink
2 - No Pink

Yeah.. it was not terrible but it was not awesome either. The game was way too clean to do this to but it will be far nicer when done.

Did some tweaking.

Not sure that I like the wizard tho...
1547658758700_image001 (resized).png

But I do like the girl...
image001 (resized).png

I had thought about just a bit of color on the wizard but it seemed so little

1547664494716_image001 (resized).png

The accents on the balls for the front looked a bit goofy. Scaled a few of them down so that they fit better.

FrontCabNew (resized).PNG

Top side nearly complete.
IMG_20190120_152042 (resized).jpg

I'm digging the target decals.

IMG_20190120_152104 (resized).jpg

Bottom side started. Doing away with the bare wire for the inserts.

IMG_20190120_193657 (resized).jpg

Flipper plates clean up nicely.

IMG_20190130_110410 (resized).jpg

IMG_20190130_112853 (resized).jpg

Buffing. Completely done with just the buffer.

Playfield temporarily in cabinet for testing... That and laziness to start the cabinet part of the project

IMG_20190202_145705 (resized).jpg

MVIMG_20190202_133858 (resized).jpg

I've been working on the cabinet. I decided to change the cabinet paint just a bit..

Color around the ball only. Pulling the color out of the guy.
SBM_Full_Cab_Stitch2-new (resized).png

And the front will only have color on the balls. I do need to fix this front coloring up a bit but you get the idea.

FrontCab-Stitch_done (resized).png

Backbox will be plain. I'm torn on this one a bit tho. The color, if done to be somewhat accurate, would be on the bottom side of the ball between the hands but that is so minimal I'm thinking no color.
BackBox2_flat_Stitch2_minColor (resized).png

After filling my garage up with dust sanding this...

IMG_20190215_205216 (resized).jpg

I bought one of these...

IMG_20190215_205210 (resized).jpg

Guide coat.

IMG_20190216_182207 (resized).jpg

Any tips on where I can get one of these little switches?

1129215622 (resized).png

It is the same as the one on the coin door.

And the sander did get a workout yesterday. Garage is remarkedly dust free.

Stencil time... Pinball Pimp set me up with my custom colors.

IMG_20190302_120350 (resized).jpg

First color on cab looks good.

IMG_20190302_125516 (resized).jpg

Sorry... Missed pics of the backbox until the end.

IMG_20190302_151921 (resized).jpg

Got the yellow on the ball cut and painted. Scanned the stencils from Pimp and designed my own yellow and orange layers on the ball.

IMG_20190303_203231 (resized).jpg

Orange layer.

IMG_20190304_191309 (resized).jpg

Blue going down.

IMG_20190309_124056 (resized).jpg

Going to need a touch-up on this side

IMG_20190309_124103 (resized).jpg

Rattle can but I'll put a 2k auto clear from a gun on top.

Other side has less touch-ups required.

IMG_20190309_141750 (resized).jpg

The end is closer.

IMG_20190313_212447 (resized).jpg

A bit closer yet...

IMG_20190313_222433 (resized).jpg

Clear coat time. I like shiny

IMG_20190316_195808 (resized).jpg

Decided to brighten up the yellow...

IMG_20190319_214635 (resized).jpg