Freeze spray method:
(As noted below, don't pull the Mylar off so aggressively as the video above)
(Topic ID: 179587)
You're currently viewing posts by Pinsider comment23.
Click here to go back to viewing the entire thread.
Quoted from Bryan_Kelly:Personally, in that first video is an accident waiting to happen. You don't ever want to be aggressively pulling on the Mylar. Do this, and there's a good chance of pulling artwork off inserts.
I take a brand new metal razor blade, the kind you scrape windows with, and lift a small corner of the Mylar. Hold it at a real sharp angle. It's a piece of cake. Now grab that corner with tweezers and spray the portion of Mylar in front of it. Don't get cheap. Spray the shit out of it. As you're spraying, very lightly pull on the Mylar. If you use enough spray, it will literally come right up. If you feel any resistance at all, use more spray.
Again, do NOT pull hard on the Mylar and don't ask me how I know this!!
100% agreed. I just did a quick YT search to provide some examples, but you're right, definitely don't get in a hurry!
You're currently viewing posts by Pinsider comment23.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
