Quoted from John_I:

The speaker panel magnets and apron decals are available now!!
https://pinside.com/pinball/market/shops/1312-space-coast-pinball/05784-rush-dress-up-magnet-art-and-decal-art-

Quoted from tdiddy:

Our Rush caps are almost ready to go, just a couple small tweaks. Pre prders will start shipping soon

[quoted image][quoted image][quoted image]

Quoted from John_I:

I make the ticket magnets. I picked the ticket I did because it was very clean and the colors went with all of the three versions of the game but especially with the LE. I have a customer who is working on possibly being able to customize the tickets with a template. If so, there is a possibility to print them as custom decals instead of magnets. If you have a scan of a particular ticket, I may be able to do something for you too...

Quoted from j_m_:

been working with john to make these a bit more customizable for people. I've found about 3 ticket designs that I will work nicely and with the option to change just about anything on the ticket face itself, will make the magnet cover-up a bit more personnel and meaningful like the first/last tour that you saw them
here's a sample, completely re-done with a different ticket color. some of the fonts are close but not quite perfect. I'm still searching to find replacements that are closer to what was originally on that reference ticket
[quoted image]
as for the flexibility portion, here's an earlier version of the same ticket but with a different font (a farewell to kings tour). ignore the fact that the rest of the information is the same for now
[quoted image]
I have fonts to cover basically every tour, however some do not lend themselves to print on the ticket very well. this ticket design may look good in a yellow (gold), blue, red, or purple

Quoted from j_m_:

the magnet stock showed up early. here is an early test
[quoted image]
I’m going to look into a vinyl label stock to print to. I’m not a fan of using paper (like this test) for durability
additionally, the adhesive on the magnet is strong, so you only get one shot at putting the image down

Quoted from John_I:

Is someone making plastic protectors yet for Rush? MUCH prefer clear.

Quoted from OLDPINGUY:

A friend received his games, and was unhappy with the indictor bulbs.
He reached out, and I have a small amount of Fluted Color left.
I did a Quick Gold Paint job, which can be lots better, and feel it made a nice improvement.
What do you think? I have a few bags left, i could make a few sets up.[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

Quoted from OLDPINGUY:

So, I have received a couple of requests. I have enough to do ONLY 10 (Now 9) sets.
These are NEW bulbs, from Comet Stock of mine.
Thats 3 Green, 2 Red, and 1 Orange.
Yiu will need to Paint them Gold/Antique Gold.
With Shipping they would run $14.95/set and $20.95 for 2 sets.
PM me, for Friends and Family Paypal, and I'll get them out.
I dont expect them to last more than a couple days.
Thanks.
Art

Quoted from beelzeboob:

I'll take both sets, Art. My friend and I could use them. PM me and let me know how to pay you.

Quoted from beelzeboob:

Thanks, buddy. I plan to flip them for $500 next week.

Quoted from pb456:

I would like red or orange.

Quoted from PinMonk:

You can dye it, though...

Quoted from PinMonk:

Have you tried? I've done it. Definitely tints it.

Quoted from SkyKing2301:

Definitely a fan of Pin Monk's Mode Color Insert Bracket Set. Installed it this morning -- very easy to do, btw -- and it really helps keep track of the modes better since it helps associate them by color.
In this pic you can also see I installed the Houdini flipper toppers. While I wasn't wowed by them at first, I then turned the game on -- and the lights coming from the apron makes them cast shadows in the negative areas and gives them more apparent depth, so now they look really cool.
[quoted image]

Quoted from SkyKing2301:

Got those straight from American Pinball --https://store.american-pinball.com/products/steampunk-flipper-bat-topper-set

Quoted from John_I:

This is something I've been working on to replace the factory LEDs on the time machine. It's taken a lot of work and design changes to get to this point. This is still a working prototype though, I should have the proper color LEDs in this week. I hope to make these available soon.
Comments?

Quoted from rimmeym:

Got my new LE today. Absolutely love the game. And our Rush Coin Door mod looks awesome on the front of this machine!!!
https://pinside.com/pinball/market/shops/1337-inscribed-solutions/06581-rush-pinball-machine-coin-door-mod
[quoted image]

Quoted from rimmeym:

Great idea! Would you want it split so you don't have to take off the rod and you can just slide it around the split, or would you want just the hole and have to remove the rod?

Quoted from beelzeboob:

I have to see if I have a set that matches what you have. Can you post a pic and I'll check when I get home tonight.

Quoted from SkyKing2301:

I did the same thing, lol. If you want any of my mods, and you want to split a Houdini set down the middle, I can include the extra one when I ship your order. lmk!

Quoted from j_m_:

I've got an extra rush banner from marco's if anyone's interested. pm me for details

Quoted from Apollo18:

Speaking of armor.
I was opening the hinges today to install Lollipop rails
I lost one of these hinge screws (image below)
Someone please help me replace it.
My OCD won’t let me be in peace and I can’t find that freaking screw! LOL
Please. What’s the part number?
I must replace it ASAP! [quoted image][quoted image][quoted image]