Ok after reassembling the pf I cannot get the gate to work properly. It will open but after cutting power it will not close. Spring on armature not strong enough or miss adjusted pawl. Anyone shoot me a pic of the bottom side, opened and then closed?

Thanks,

Ken

20200223_190147_resized (resized).jpg

used a little more return pressure on the contact finger and its functioning.

Thanks everybody

they all tend to buzz. one hack is to put a piece of elec tape on the armature where it hits coil.

as to a little more pressure, adjust/bend contact finger to tension the gate return

pasted_image (resized).png