Indiana Jones: The Pinball Adventure
Williams, 1993I need to replace a transistor on my Rottendog Power Supply board (Q42), the physical part I removed says FQP13N10L, though when I went to Rottendog's website and looked at the schematic it stated it was a 20N10L. Which do I use? the 13A or 20A? When I looked this up on Marco http://www.marcospecialties.com/pinball-parts/FQP13N10L, it says not for use with Rottendog Power Drive Board. Just want to make sure I buy the correct part. Any help would be greatly appreciated.
You can't go wrong with an ILR540: http://www.marcospecialties.com/pinball-parts/IRL540
An IRL540 will work fine.
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
http://www.PinWiki.com/ - The new place for pinball repair info
It turns out I came to this post without more properly reviewing which transistor was under review.
If you might be able to help me, please review my in depth review of my issue on Pinside forum below:
https://pinside.com/pinball/forum/topic/rottendog-mpu004-transistor-replace-20n10l
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rottendog-transistor-replacement-wpc?hl=ackerapple and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Stevensville, MI
Barrie, ON