Just picked up a Rollergames the other day. Tweaking a couple things and cleaning it up. Trying a couple of games, it will kick a ball from the trough into the shooter lane, then it will kick a second one. Not sure if I bumped something in the ball trough area or if it is something electrical. Any thoughts?

Checked the shooter lane switch. Unseated the push on wire connector and realized it actually wasn't in the connector, but on the outside of the connector but inside the rubber "boot". Reseated it and the game is playing fine. Thank you for sending me in the right direction.

20180202_134158 (resized).jpg

I also had an issue with the ball lock switches above the shooter lane. Once I reseated the connector on the ball trough switch, I still had the issue of kicking out two balls, but it was only once I locked a ball. Without locking a ball, the ball trough worked correctly. I checked the switches in the ball lock area, and found that the second switch for the second ball had gotten bumped. I readjusted it back into position and the problem went away.

Glad that was the trouble. Now onto playing.