Rollergames
Williams, 1990You're currently viewing posts by Pinsider Andy_B.
Click here to go back to viewing the entire thread.
Might be a stupid question but is the ground wire from the lower cabinet connected to the stud with the wing nut in the head? Are all the green ground connector wires connected in the head?
The pic shows the head stripped out but the wing nut and ground connectors are there. This is from my old Rollergames.
DSCN1856 (resized).JPGQuoted from JanS:Yes all were connected. Read previous post. Tiny bit of acid damage on 3 pins of 2 resistor arrays and an IC leg. Thanks!
Did read it. Didn't see anything about ground strap or whether repairing the battery damage had fixed the problem. Thanks!
You're currently viewing posts by Pinsider Andy_B.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rollergames-flash-lamp-issue-help-needed?tu=Andy_B and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Worksop
Nashua, NH