You're currently viewing posts by Pinsider Star_Gazer.
Click here to go back to viewing the entire thread.
DumbAss no only the lower lights behind the translite, its controlled using a relay (for flashing etc), from the relay board there is a a brown/red wire that should go to j11, but i dont know the nr of the pin. the whole j11 connector should be empy, besides that 1 red/brown wire.
PinballManiac40 thanks, but its still confusing to me, later models of Rollergames do have only 1 wire on the j11 connector, is just have to know the nr of the pin.
@pinballmaniac40 Yes you were right, it was a burnt pin on j10, cleaned it a bit and it works now! thanks! btw that one brown/red wire is now on pin j11 pin11 (maybe 6 is also fine, but not going to try that), and was indeed to "unpower" the all backbox lights. Also tested to pull out that small plug on the relay board, and then all the lights will stay on, so also confirmed.
You sure? because it was already like that on the connector, i saw a small piece of the wire in the connector. Also in the 2 youtube of tnt it seems it should be 11:
Maybe the manual is showing the early type of Rollergames? they had extra flashers behind the translite, also the j11 connector had more wires, for controlling these flashers. played a couple of games, seems to be fine. (Awesome game btw
You're currently viewing posts by Pinsider Star_Gazer.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rollergames-backbox-lower-row-lights-don-t-work-help?tu=Star_Gazer and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.