Quoted from uncle_jose:Hello to all! so I just bring home my first Rollergames! so excited but (as expected) the machine has some issues, maybe you guys can pitch in.
The machine is not giving any error on "self test" but the following coils are not firing nor during "coil test" or during game:
- Upper Kickback
- Lock Kickback
- Ramp Diverter
- Outlane Kickback
How can I know if the problem is the coil itself or a transistor at the board?
The machine also doesn't lit the backbox but I found a "fried" GI molex connector that I will replace.
Any input will be greatly appreaciated!
TIA!
~ja
Hey Uncle_Jose! Welcome to the club! The first place I would check is the fuse that is mounted under the playfield. It is a single fuse that is right around the center of the underside (centered both width and length) and its kinda hidden behind a bunch of wires. Pretty hard to see at first! That fuse protects the coils you are speaking of AND it was blown on mine. Changed the fuse and it worked 100% after that! If that doesn’t fix your issue then it’s likely a wire on that chain that has come loose or a connector on the interconnect board that is fried.
Good luck and let me know how you make out!
Eric