I have a later RG without diamond plate and on Friday I’m picking up an older one with diamond plate (in much nicer condition).
Should I swap the ramps and put the plated ones on the diamond plate game?
You're currently viewing posts by Pinsider Lopa.
Click here to go back to viewing the entire thread.
I have a later RG without diamond plate and on Friday I’m picking up an older one with diamond plate (in much nicer condition).
Should I swap the ramps and put the plated ones on the diamond plate game?
I definitely have an early production game
Quoted from Shogun00:Are the SKATE targets drop targets? If yes, then it's a prototype. If not then it's an early 1st production unit.
The prototypes are test units made before the actual production run.Mine is set at 3, but that's because of nostalgia reasons. There is no 4-ball option. Only 3-ball and 5-ball options are available. Go ahead and give it a go and see if you like the 5-ball option.
I’ll check first thing in the morning.
Quoted from goodypin18:I have replaced my original plastics with a new CPR kit and it came with the flags that go above the pit. My game never came with these so I'm pretty happy that the kit included them. My question is, can anyone measure their black plastic spacer posts that bring the flags together so I can order them? (area circled in yellow highlighter for reference). Thanks.
[quoted image]
You're currently viewing posts by Pinsider Lopa.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rock-rock-rockin-rollergames-club?tu=Lopa and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.