I am finally working on a Bally Rock Makers, that I picked up about four months ago. Have two issues.

1) I can start a game, back glass lights up, playfield lights do not. If you look at the pic it shows the 15A and the two 10A fuses in the cabinet. Note the middle fuse has two grey wires attached it it. They both appear to be added by a prior owner. They are attached in the backbox to the GI lamp run second pic shown. I’ve disconnected them to see what happens, the back glass lights are on as they should be, but still no playfield lights. Don’t have any idea what these are for? I can deal with this latter. This 2nd issue is a real problem.

2) as I said the game starts, launch the ball, does not matter what it hits, the match unit coil energizes and stays stuck on. This happen no matter what the ball hits. I’ve attached a pic of the match relay circuit. Where would you suggest I start looking for this problem?
Thanks
Kickout
image (resized).jpg3B30E382-A3BE-4F57-BF87-4049C283D55F (resized).jpegD99DE425-2002-49BC-B86E-2D78AD909D25 (resized).jpeg540D5AAC-AD66-4B75-9D3E-B553BDCDD385 (resized).jpeg

Got the #2 issue fixed.

Ok, did some checking and tracing of voltage. Have 6.5A on transformer lug, Have 6.5A on AC relay on the input leaf, For some reason when the switch closes to send the voltage to the fuse, I get no voltage reading on the output leaf. I took the leaf switch apart both leafs are intact no breaks. Contacts are clean and closing correctly. I’m stumped! Help please.
Kickout