Hi GameVault!
I think this is one of our Robby the Robot mod,
We made instruction video:
Let me know if you need more info or send us a email here: [email protected]
Best regards
Pedretti_Gaming thanks for your help! We still have a couple questions. There's some confusion - the connector is 9-pin but the wires are on pins 2, 3, 4, 5. Pin 3 is a key. Is it possible this mod we bought has the connector wired in reverse? Can somebody give me the correct pinout and what each colored wire is for? Does the alligator clip supply 5 volts?
Thanks so much for your help!!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/robby-robot-install-help?hl=starcade and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.