snakesnsparklers Do you have a reference for a silent PS fan mod ?

Did someone add an extra volume control near the Coindoor to the LP-168 Amplifier ?

Thanks!

I replaced the fan with one I had but it seems to make some noise in general, I don't know if there is much change with this Vantec SF6025L 60mm Stealth Case Fan? Is it absolutely silent or do you hear the fan?

I also replaced the servo of the robot because it was not working anymore, I used a new FS90MG servo with the metal gear, more robust than the plastic one.
but I have the impression that it turns faster and that when the robot goes back to the left it stops and shakes, it's quite curious but a bit crazy

do you know how to light the robot's eyes in green?

i think the best fan is HA60251V4 SUNON only 10.7dB ,
The Vantec SF6025L is 20dB and the original fan in Rob Zombie is 34.5dB (KD1206PTB1 SUNON)

It can be used also in other spooky pinballs

I also swapped a defective servo, the original gears are plastic, I bought some Micro Servo 9G FS90MG in metal (gears) from Aliexpress.
It is strange that after the replacement, the robot works but does not stop shaking when pivoting.
any feedback are welcome