Rob Zombie's Spookshow International
Spooky Pinball, 2016You're currently viewing posts by Pinsider mara.
Click here to go back to viewing the entire thread.
Quoted from dung:Updated to v24, but game keeps spitting out balls. Maybe a setting changed I wasn't aware of or maybe it suddenly developed a trough switch problem? Anyone had this? Otherwise will probably dicker with the trough when I get the chance.
My game spitting balls random also, it starts with 23 and also 24. I think that problem is not software, have checked switches many times and trying adjust those. Nothing find yet.
Quoted from dung:I spent a good half hour on it. Pulled the balls and started hammering on the pf, but couldn't get any switches to act up. All of them are closing when expected. Loaded the balls hammered again, all switches solid.
Reset the software to factory defaults, have not had an issue since. Odd, but its working now and going from version 22 to 24 was a nice change. Now need to fix the murder ride switch as it pulls out of the slot and the ball gets hung up. Also need to do something about the mode start vuk. A hard shot to it results in the ball coming back down the orbit.
Is your game worked after that? My game starts random balls again, not so often but almost every game. It might shoot one ball or maybe more.
I tryied that factory defaults, nothing, again and after that game works maybe 10 games, but starts again, i have banged playfield with no succes,
What you have done with amplifier? My game have terrible sounds, it will be better if push connector in. I havent ooen amplifier yet but iI think it next step or buy new better one.
It have issues, I hope that I can solve those because I like game a lot.
I have weird problem in RZ, it havent got any sounds.
If I unplug 3.5mm cable off and put it back, game have sounds for 50 seconds and back to mute. Disconnect cable again and same thing, u have sounds for 50 sec.
I have tryied with 4 cables and I think problem is not pcbs connector.
Tryied 2 different sd card
Now I think problem is in pcb? Anyone have any other ide? Or similar problem?
You're currently viewing posts by Pinsider mara.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rob-zombies-spook-show-international?tu=mara and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mikkeli
Lewiston, NY