I've have my RZ for a few weeks now and I'm really enjoying playing it. I have added a few lighting upgrades to my machine. 4 small LEDs in the skulls eyes, lighting the chicken bucket on the jet popper, add extra flashers to the robot, chicken and gasoline sign. After upgrading the insert and GI LEDs, I decided to do my biggest improvement by adding some bitchin UV GI lighting. This machine is dark when the lights are off so I wanted to make it playable in a dark room. The camera can not show the true color of the UV light and is not washed out. It's more blueish and makes everything pop. Perfect for this theme.

I still have to add some interactive speaker lights and new powder coating colors. I'm going to do a burnt orange on my machine. I'll post more pictures soon.

I'll offer these upgrades if anyone is interested in them.

Steve
Pinball Refinery

20160919_170640 (resized).jpg
20160919_170728 (resized).jpg

20160915_201533 (resized).jpg

20160915_203138 (resized).jpg

Here are the RZ mods that I have come up with and I have them on my website to order.

http://pinballrefinery.com/store#!/Rob-Zombies-Spook-Show-International/c/21009054/offset=0&sort=addedTimeDesc

Thanks,

Steve
Pinball Refinery

Yes, this is a add-on upgrade GI lighting kit for it you will not be replacing the machine GI lighting. I like the look of the standard white LEDs under plastics, but the upgrade makes the playfield and the figures stand out. There are 3 areas and 4 sets of the UV lighting that I add to the machine. I did edit my website to say this, thanks for asking.

Thanks for everyone that has placed their orders and I will be building them.

Steve
Pinball Refinery

I use my custom UV LED strips that my supplier builds to my specification. Most of the other UV LEDs on the market are very dim and dull, but mine are bright and work amazingly. I place them in the machine where they are not going to blind you by shining in your eyes, but light up the features on the playfield. The kit come with everything you'll need, LEDs, plug in harnesses, mounting bracket, zip ties and pictured instructions.

Steve
Pinball Refinery

I just finished and added some interactive speaker lights to my RZ. If anyone wants these or would like to add them to their order it's not a problem.

http://pinballrefinery.com/store#!/Speaker-Lighting-for-Rob-Zombie-International-Spook-Show/p/72732669/category=21009054

Here's a few pictures and a YouTube video.

Steve
Pinball Refinery

20161005_150228 (resized).jpg
20161005_150317 (resized).jpg

I'm just finishing up my RZ and Pin15 RZ with the powder coated armor. Here's a few pictures of a mid point and finished.

Wow, it's Bitchin. .... what huge difference this makes in the look of the machines.

I'll be offering this powder coated armor on my website.

Steve
Pinball Refinery

20161007_161122 (resized).jpg
20161007_161059 (resized).jpg
20161007_161420 (resized).jpg
20161007_161143 (resized).jpg
20161007_183310 (resized).jpg

I have all of the Rob Zombie lighting upgrades available to order off my website, here is the link to the store if anyone would like to purchase them:

http://pinballrefinery.com/store#!/Rob-Zombies-Spook-Show-International/c/21009054/offset=0&sort=addedTimeDesc

There are pictures and videos on the website to see the difference with these added.

Thanks,

Steve
Pinball Refinery

I am working on building them as orders are placed, currently I can have them shipped out this week.

Steve
Pinball Refinery

This is true, if you have other mods installed in your RZ, topper, etc. in order to power up my UV LED GI lighting kit you will need this splitter board and can be ordered from PBL. If you don't have these mods the upper right corner of the main board in the back box will be unused and open, it is a 4 pin terminal.

Thanks everyone that has ordered these upgrades and I will work on getting them out,

Steve
Pinball Refinery

Here is a post that I seen on Jose (Tilt Graphics) Facebook page about some game blades for Rob Zombie... I will definitely be ordering a set for my RZ....

https://www.facebook.com/tiltgraphics/

RZ game blades (resized).jpg

I just installed the game blades from Tilt Graphic in my custom RZ... The icing on the cake .

Here are a few pictures of what they look like installed with the UV GI lighting on and off. I which my phone camera took better pictures.

Steve
Pinball Refinery

20161028_145123 (resized).jpg
20161028_145153 (resized).jpg
20161028_145222 (resized).jpg
20161028_145233 (resized).jpg
20161028_145703 (resized).jpg

Yes... very easily installed without pulling out the playfield. Just raise the playfield up to the service position. And install them by aligning the back to the front and sticking them on the sides.