Road Show
Williams, 1994You're currently viewing posts by Pinsider Pesmerga.
Click here to go back to viewing the entire thread.
Hello guys! My Roadshow pinball is giving me some problems with multiball:
When you lock the 2nd ball away, rather than putting another (3rd) ball into the shooter lane to get into Ted's mouth, it releases BOTH locked balls - then when you start multiball - it only has two balls.
Has someone else experienced the same issue? How did you solved it? Thanks!
Hello thank you for your answer! Yes there are 4 balls installed! But when 2 are locked the games doesn't work as it should..I also noticed that it needs a few try in order to eject them..instead the star city hole eject them quickly..
The game is now giving me also an error on switch "77 Under blast zone" but it seems to be no error because the switch works!
Update! The switch error is simply a desoldered diode, but i don't see anything wrong with the pop up multiball hole..it seems that some switches were replaced..do you think that this could be the problem? In the switch test, throwing a ball in the hole, all the 3 switches seems to work! I post some pic, if you can please share with me yours, so I can compare and see how the original switches should be! Thanks!
Quoted from BigLebowski:remove the whole assembly from the machine, it´s not hard to do. I described the process in the owner´s club thread.
That way you can play with the switches (which apparently aren´t original) until they really register every ball correctly.
Thanks for the answer! As you can see I started to remove it but I am not able to take it out..it seems blocked from the other side and I really don't want to unassembly the ramps.. 
maybe I'm doing it wrong? Can you link me your topic? Also, if is not much trouble , could you post some pictures of the original switches? Thanks!
Quoted from dsuperbee:The picture you posted of the switch looks like it's touching the center lug. Make sure it isnt.
Sorry what do you mean with "center lug "? Where should I have to look? Thanks
You're currently viewing posts by Pinsider Pesmerga.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/roadshow-multiball-problem?tu=Pesmerga and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Richmond, VA