Quoted from eyeamred2u:Yes, he is only seeing the drop not under any load, resets usually happen under load.
This is where having a good meter with a min/max voltage recall comes in really handy.
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Quoted from eyeamred2u:Yes, he is only seeing the drop not under any load, resets usually happen under load.
This is where having a good meter with a min/max voltage recall comes in really handy.
Quoted from Classe:Williams probably had their reason to change from bridge rectifiers on the WPC-89 games to diodes on the WPC-95 games
Quoted from G-P-E:these diodes costs much less than a GBPC type bridge rectifier
Cost is the primary consideration in all manufacturing decisions. You can engineer a widget that would last forever, but if it costs more to produce than a widget that will wear out after 5 years, guess which one is going into production.
You're currently viewing posts by Pinsider Pin_Guy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/road-show-wpc-resets?tu=Pin_Guy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.