Quoted from kechlesurf:What am i doing wrong or any suggestions?
Did you start by holding the left button down for five seconds?
You're currently viewing posts by Pinsider kdunbar.
Click here to go back to viewing the entire thread.
Quoted from kechlesurf:What am i doing wrong or any suggestions?
Did you start by holding the left button down for five seconds?
Quoted from Phantasize:Please share more info if you can. What exactly did you do to fix it?
Mine is almost broken off as well, so i need to figure out what to do. But i have zero experience in that kind of repairs...
The top of my playfield was broken off, so the Cliffy wouldn’t work until I filled it
Trimmed off the back of the repair until the Cliffy fit, didn’t have to break the back off completely, Re-drilled with Cliffy installed. Very solid repair, about an hour of total time, I let resin cure overnight
Quoted from Phantasize:Thanks for sharing! Excellent pictures
I thought you were going without the Cliffy protector. But your approach seems to be a really good solution.
I actually bought the blast hole protector a year ago, planning to put it on before it broke because it is such a weak area
Quoted from Spacemanratso09:Oh no
New to this game teds eye during gameplay looks like it “fell off”
Anybody could point me in the right direction to fix would be fantastic
Thanks![quoted image]
Quoted from Mando:Are the auto sensing eddy boards still around for this game? Seem sold out on pin bits. Mine are working fairly well so no biggie I guess.
https://www.tanglestech.com/TPP-1023
Bought these, worked well on my pin
Quoted from Piso:I'm ordering some new rubbers for my RS. Most kits says 2-1/2" for the slingshot like I currently have mounted. But they feel a bit to sloppy to me. RS manual says 2". Should I trust the manual? What have you used?
I have 2 1/2” silicone on mine, seems fine, they do make a 2 1/4” ring, but 2” would be too tight
Quoted from DaveTheTrain:Hi all,
I'm looking to get a Road Show as my first pin, so I thought this would be the best place to ask some questions.
I'm aware of Fish wear, but does it affect gameplay at all?
Is it fixable (other than a whole new playfield).
Trying to educate myself before I make a mistake and pay over the odds for something I don't know about
The biggest problem I had were the Eddy sensor boards, I replaced them with auto adjusting ones and haven’t had a problem since
Quoted from MikeSinMD:Which ones did you get?
image (resized).jpgI think this is the part you’re looking for https://www.marcospecialties.com/pinball-parts/A-13270
Quoted from Jkaping:Help! I’m trying to save a Road Show and Ted has a broken part I can’t find anywhere. The plastic piece that runs front to back that uses the two metal wires to turn the eyes side to side is snapped in the front. Can anyone point me to this part or 3D print it? Thank you!
[quoted image][quoted image]
https://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=A-19258
https://www.marcospecialties.com/pinball-parts/10-494
https://www.marcospecialties.com/control/keywordsearch?SEARCH_STRING=01-13416
Quoted from MyParagon1979:What type of paint is best to use for the radio?
I just use vinyl
image (resized).jpgQuoted from allsportdvd:Okay heads assembled! Thanks for the video
Now next question, part number for the spring on the underside of the bulldozer blade?
[quoted image][quoted image]
Looks like you might be missing these in the eyelid. NYLINER® 1/8 INCH SMALL 20-8790-1
Standard snap-in Nyliner® bearing 1/8 inch Inner Diameter
Reference:
Stern 545-5335-00
20-8790-9
You're currently viewing posts by Pinsider kdunbar.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/road-show-club-hard-hats-required-on-site?tu=kdunbar and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.