I'm in need of two simple parts for Red's eyes.
The plastic eyelid link 03-8479 and the centering flange 03-8486.
These are $3 and $2 each at Marco's Specialties, but shipping to the Netherlands will kill the deal completely.
Can someone who is ordering at Marco's help me out?
Order these parts for me and put them in a simple bubble envelope.
If you will send them to me for more aceptable fees, I'll be more than happy to PayPal you the owed money.
Maybe someone might consider it being a donation....

Peter
www.inkochnito.nl

Yes, I know.
It's also available in the Netherlands, but only the eyelid link.
Not the centering flange.
Sometimes the simple things are hard to get....

At the yellow arrow....

wpcscpu (resized).jpg

I like the B version...
Maybe you should add a poll.

You should enter the "blast zone" hole for the skill shot, not Ted's mouth.

Ted must have had an accident with his bulldozer.....

Just shift the (un)ballans weight so it doesn't shake as hard.

L6 version
https://www.ipdb.org/files/1972/Williams_1994_Red_Ted_s_Road_Show_Revision_L_6_Game_ROM.zip

Did you try the pinwiki site?
It has most of that info and maybe more.
http://www.pinwiki.com

Check your connectors at the left side (power input) of the Power Driver Board.

Manual page 2-22 thru 2-25.

Wouldn't these look great on Road Show....
https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/04735-caution-posts-for-jurassic-park-road-show-amp-more
I just ordered 12 of them.

89e6b89213e8144556adf98d39c04ec8a654c48c (resized).jpg

A few spares and for someone else his game.
Maybe I add a post in a place where it looks good and does not interfear with gameplay.

Yes, they are.
Check if the playfield light work if you change J120 to J121 and vice versa.
If it works, check the connections between J120 and J121.

The connector wiring information is also available in the manual.
Near the end of the manual are the pages with all the connectors mentioned, along with their function and color.

Clean the mechanics or take it apart and do it again.
Use manual page 2-23 and 2-24 for more help.
This should go smoothly without any force.
Even gravity should let the lids fall back to their halveway position.
Does the coil have the centering flange (part # 03-8486) at the bottom?
Sometimes this is missing.

Peter

Did you check my website http://www.inkochnito.nl
Look in the Williams section.
Dowload the Road Show file and print it on a paper of your liking.
When printing be sure to set scaling to "no scaling", do not adjust to paper size.
Can be any color you want.

I've seen it once, but it look very unnatural.
I wouldn't do this, unless it was Stargate.