Road Show
Williams, 1994You're currently viewing posts by Pinsider Staffan.
Click here to go back to viewing the entire thread.
Quoted from pencilneck:Found this in the cabinet the other day and can't figure out what it might be. Was on the left side, maybe 20" (50cm) from the back. As best I can tell, everything is working just fine so it is possible this is a left over item from a past repair. Any input is welcome.
Thank you.[quoted image]
Quoted from MyParagon1979:What’s supposed to be here? In the hole?
[quoted image]
[quoted image]
This is what's on mine:
20220309_080338 (resized).jpgQuoted from MyParagon1979:How can I not continue to have the ball get stuck here? For skill shot. Need to wiggle the machine for ball to drop.
[quoted image]
Hard to tell in the images, the metal plate on mine looks to have a bit more angle.
Try to bend it, might have to remove the plastic and use pliers or just bash it.
20220309_080513 (resized).jpg
20220309_080653 (resized).jpg
Quoted from pudealee:Are those bulbs that are out in the pic above not GI lights? Or, am I confusing something?
Both the working and non-working bulbs are part of the GI, check connector J120.
Quoted from Santis:They look like the backbox flashers. If sockets are different color than the other is because those are flashers.
I'm pretty sure there are no flashers in the backbox of roadshow? If you order a LED backbox kit you get 35 'regular GI bulbs'
There are 35 identical sockets on the insert panel, there are 6 wires coming from these, all are connected at J120 (on mine, could also be seated on J121, they are interchangeable.)
20220726_124421 (resized).jpg
Quoted from pudealee:J120 is secure on the pins. Should I try to re-seat the wires on J120?
You can start with re-seating the connectors (if you haven't already). Try swapping the connectors at J120 and J121, they might already be swapped, the connector with 6 skinnier wires are backbox GI (the manual show J120 as GI to playfield and J121 as GI to insert panel)
Also take a look at J115.
You're currently viewing posts by Pinsider Staffan.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/road-show-club-hard-hats-required-on-site?tu=Staffan and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Minneapolis, MN