I have a williams Road Kings machine which I just replaced the MPU board on. It works fine now, but the 4 top bumpers won't fire.
They fire in test mode but not during play. The slingshot bumpers work.
Can anyone help.
thanks.jim
I have a williams Road Kings machine which I just replaced the MPU board on. It works fine now, but the 4 top bumpers won't fire.
They fire in test mode but not during play. The slingshot bumpers work.
Can anyone help.
thanks.jim
Hey jim !
So, if the pop bumper coils are firing during test mode, i would assume that the switches are to blame. It's possible the switches need to be adjusted, maybe they're not wired up correctly or at all ?
You can use a multimeter to test the switches or you can go into the test menu and in switch test go touch the pop bumpers. Of nothing happens then you'll know the switches are to blame.
https://pinside.com/pinball/forum/topic/vids-guide-to-rebuilding-pop-bumpers
Heres a nice guide for yee !
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/road-kings-bumper-problem and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.