No Good Gofers
Williams, 1997I recently purchase a Williams (No Good Gofers) from a relative, everything works except about 20 percent of the time the right lane spinner tilts the machine during play. I have removed the glass and been able to recreate the tilt by spinning the spinner by hand without a ball on the table.
I don't see bare or broken wires anywhere and slam tilt is on a different row and column in the switch matrix.
Help!!
After further inspection of the switch I found that the switch was wire incorrectly. Effectively the diode was not in the circuit. After moving the white wire to match the diagram in the manual, the game seems to operate just fine. Thank you for the help erak. I wouldn't have looked closer at the switch if not for checking the diode
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/right-spinner-tilts-machine and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Mesa, AZ
Grimsby, ON