I can ground the solenoid and make it fire , but it will not fire in the solenoid test menu. So I removed an BD649 and installed a TIP120 @ Q58. This still did not fix the problem. This should be a simply problem, but for the life of me I''m not able to think it out. Must have had to much egg nog last night.

I ran a wire from the solenoid, with the solenoid test menu repeating test #9 for the right sling to J127 pin 1. It still didn't fire

I can fire the left solenoid off the Power driver board unlike the right side.

Yes, It was a typo Tip102

Weird, My Q57 is missing and I didn't take it out. hmm

Replacing the missing Q57 fixed the problem. Feel pretty stupid since I should have seen that. Still don't know what happened to the other one.

Thank you again Grumpy! Hope that you have a great Christmas with your family. Your the best!

LMAO, I'm sure that I have a lot to do with my own problems.

Now off to the Getaway to find out what happen to the Opto's when I changed traded out parts to see if it would fix another.

I get check switch 81
Opto 1

Check switch 82
Opto 2

Check switch 83
Opto 3