Both flipper solenoids should be the exact same.
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Quoted from Knightly_McNutt:So there are three wires going to left flipper button and two to the right. But it looks like that is correct from the schematic. Sorry I wasn’t clear on that.
That’s ok buddy here’s a pic of the game and if you zoom in on it you can clearly see each has 3 lugs with three difference wires attached to each lug
8DF72062-3331-428C-BE52-1E198E62C985 (resized).pngQuoted from YeOldPinPlayer:You guys are talking about two different parts of the game. OP is saying BUTTONS, not coil lugs.
I could have sworn the OP mentioned that the 2 flipper coils were different.. one had 2 lugs and the other had 3 lugs.
Quoted from Knightly_McNutt:Sorry for the confusion was just trying to rule out the flipper buttons as the culprit. I do believe they are wired correctly after looking at the schematic. I’m going to test the coils resistance and ground it to see if it works when I get home and report back. I appreciate the input!
No problem!! Frunch has you covered
You're currently viewing posts by Pinsider pinmike.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/right-flipper-on-1977-bally-evel-knievel-trouble?tu=pinmike and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.