So was having issues with the right bottom flipper on HS2 stuttering a bit and took it a apart and replaced the coil sleeve and the problem seemed to go away. Everything was working for for 48 hours or so (I even put up a new high score). But then it started happening again and when I took it apart to see if I spotted any other issues and when I put it back together I had somehow lost high power to the flipper completely. now, the problem is consistent and it appears to fire very slowly and weakly each time only (presumably its just the hold that is working). EOS appears to be open and working properly. I was inclined to think it was a mechinical issue due to the original problem and temporary fix, but I'm not sure. Perhaps I blew something with the earlier mechanical issues? I'm pretty frustrated and taking a break to play the new pin we just picked up but figured I'd post here to see if any of you pros have any thoughts to give me some direction when I pick this back up tomorrow or later in the week. Thanks for any help!