You're currently viewing posts by Pinsider Jean-Luc-Picard.
Click here to go back to viewing the entire thread.
Quoted from lucky1:PIN2DMD interface with dual Hub75 output pcb from UncleSash to drive 2 panels.
Ok... I want to do this with every pin that I have that doesn't have a topper... I will have to read this entire thread... But can anyone give me the cliff notes on how much this mirror-dmd-converter will cost me?
Quoted from lucky1:The dual hub interface is no longer available because of signal problems. You still have the possibility to add a second display
by cimping a second connector to the ribbon cable and attach a controller to it. We have tested with smartdmd as main display
connected to one end the wpc dmd controller in the middle and pin2dmd at the other end. Worked without a problem.
the controller costs about 60 Euro alltogether. Then you just need a display and a power supply e.g. from fast pinball .
Thanks for the info. I will look into this.. I want to make a topper with a theme based frame for the machine.
You're currently viewing posts by Pinsider Jean-Luc-Picard.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/rgb-led-panels-for-dmd-replacement?tu=Jean-Luc-Picard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
