Anybody have a favorite RGB module? I am making a home brew using a Multimorphic LED board https://www.pinballlife.com/index.php?p=product&id=4752 Supposedly it supports both common anode and common cathode RGB LEDs. It runs up to about 22 ma on each LED channel
(color). I am looking for modules to put along the sides and under the play field. Searching for something very bright with the four leads already soldered on so I don't have to spend all day hunched over my iron.

I think what I am looking for is GI (general illumination) LEDs. I was not going to RGB my pop bumpers and using sockets for my LED modules seems like a lot of trouble when I could just wire them in directly. The RGB modules will sit in my slingshots, under the arrow shaped play field inserts and along the edges of the play field. Since I will be running them from the LED controller board I won't want them individually addressable on their own serial buss. That said luvthatapex2's suggestion of the 3 watt modules is seductive.

Fantastic. That is what I will order. You all are the best.

I had not seen TNA until now. Looks like a fantastic game. Nice lighting too.