I'm working on repopulating my cleared RFM play field. I have a question about the post behind the skinny target. Is the post secured from the bottom by a T-nut? I have a T-nut installed, but I'm questioning it.

Can anyone check their machine and report back? Thanks

IMG_5239 (resized).JPG

IMG_5240 (resized).JPG

Nice, it has been sitting for about a year. I got in before HSA closed up.

I removed the flanges, drilled the clear out around the holes and installed the guide with a little glue.

Does anyone know of a local US replacement for the back box knob? The black knob that rests against the side rails.

Part Number: 03-9992

Thanks

I'm preparing to apply new decals to my RFM. All the prep work is finished, and the base cabinet is ready (head already done). My cabinet had the decals applied over the bolts, not the countersunk bolt version. I've never cared for applying decals over bolts; it looks like crap.

I'm considering using a Forster bit to countersink the existing bolt holes. I'm not confident the alignment will be on target every time. Another thought is to switch to carriage bolts. I'm leaning towards this option.

What did you do for those who have replaced the decals on similar cabinets?