Quoted from robotron911:Anyone having issues with the microswitches in the two top lanes? Before I did my teardown, the left one basically never registered. I replace both microswitches with new ones and made sure the wire form had plenty of extension into the lane. If I manually depress them, it registers and I can hear the microswitches click. But during an actual game, they miss registering about 25% of the time. I re-adjusted the wireforms with no luck.
Also, anyone get the pop bumpers with good action. I did a complete and total rebuild on all three, including polishing the metal rings, and they are still clunky. Stronger coils? The ones that are in are to spec.
Thanks.
I have similar issues with my switches registering in my ball lock lane. Sometimes it seems like the ball travels too fast and doesn’t register with the switches, but the switches still test fine in test.
I wonder if adding a small capacitor across the switch leads would help? I’ve done this with my LOTR Palantir switch and now it registers every time I hit the switch.
Bethlehem, PA
