(Topic ID: 89874)
Linked Games
Revenge From Mars
Bally, 1999
Topic Gallery
You're currently viewing posts by Pinsider Canuck_pinhead.
Click here to go back to viewing the entire thread.
Burlington, ON
2 weeks later
Hopefully someone can help me out here.
I pulled the pf out to put on art blades (which look awesome).
After I plugged the pf back in it now keeps firing balls into the shooter lane non stop.
Any idea what I've done?
Quoted from KAPSIG1:Before you continue trouble shooting this
I recommend installing version 2.24 from mypinballs
https://www.mypinballs.com/software/rfm/code_updates.jsp
I really want to do the new code. Never updated a machine before.
Since you have done it:
1) Is it hard... or any pitfalls?
2) Is the new code "friendly" to novice players and advanced players alike? (In other words, will my wife still enjoy i, or will it be too difficult)
3) Does a 6 ball trough make a big improvement (if you have done it)
Quoted from KAPSIG1:1) The code was easy to upgrade (I'm on original hardware)
I used a windows 10 laptop with this cable
It was allot cheaper when I bought it and Amazon could have it to my house by 5pm (Cheaper options available)
amazon.com link »
I bought his software and use it to upgrade my RFM
Friends use this cable or one like it without Mypinballs update software (Plenty of writeups you can find)
2) I have a 10 and 13 year old. They have friends over all the time and they all enjoy it. I would not worry about a difficulty difference and It can be put on easy modes. The kids really like Drunk Flippers.
3) Yes I've done the 6 ball upgrade. I was not difficult. I did cheat a little
Bought 6 Ball Trough's from pinball life instead of having to add optos to the existing 4 ball trough's (Upgrade optos are provided with the kit)
https://www.pinballlife.com/trough-opto-transmitter-receiver-board-set-6-ball-for-williamsbally-pinball-machines.html
Bonus
I also added the shaker using his loom
That is the most notable change and My wife and kids say it makes the game much better. I agree.
I also added his saucer kit for the extra bling
Awesome!
Thank you.... I'm gonna give her a go soon.
6 ball trough... it will wait a few for now.
Quoted from ViperTim:I’m so incredibly happy with the purchase of my RFM.
Never played an RFM like this. So fast, so precise and the CRT image is outstanding.
So great that today I’m going to buy a The Shadow from the same guy.
This RFM is so mint I feel like I don’t deserve it almost.
But a question, the “total plays” in the menu is it lifetime plays and cannot be erased? Or can it for example be erased by software upgrade?
Also, is v1.5 latest official software? I’ve read about 1.6 but unsure if it’s official or unofficial software.
[quoted image]
Well... I was trying to decide on what colour rubbers to put on... and your pic just decided green is the way to go! Thank you.
Quoted from ViperTim:I’m not in to modifications what so ever.
But these green rubbers the previous owner put in does look really cool.
Maybe the only modification I’ll allow on this game. And the LEDs he also put in because they simply work.
I did the art blades and they really brighten up the interior cabinet. Also getting applejuice software once I get my laptop issue figured out.
Quoted from applejuice:Exactly what I thought. 30+ years of repairs knowledge here and I only fix what’s broken. Changing all capacitors for the sake of it will more than likely just cause issues, but leave him to it. Seen it hundreds of times where people change things there’s no need to, then break it. Just my 2p
Hey applejuice
Sent you a pm
Quoted from gilbi:Hey applejuice
Your 2.24 code is amazing and I would like share my gratitude again for all your time spent to make it happen; allowing us all enjoying it !
Lyman tribute as code champion is so well deserved !
Is there now some plan around 2.25 ?
Ugggh... my computer issues are preventing me updating. I really want it!!!
Applejuice and I are trying to figure it out still.
Quoted from Premier:Finally in the club my machine is on 1.2 software
How do you update it?[quoted image][quoted image]
Mypinballs.com is applejuice software. I'm in the process myself.
Quoted from embien:Yes you can. You can even pull the box (takes less than 5 minutes) and update. I use to update this way when swapping between RFM and SwE1
Do you pull the box from the front or back of the head?
Quoted from zerbam:remove the translight and it slides out from the front
Oh. I know how to take it out. Just unsure whether the box is accessible from the front or the back.
2 weeks later
Quoted from Premier:Hello,
I was trying to see of 23 inch monitor fit in the machines
It's looks good any opinions?
[quoted image]
How do the projections line up during gameplay??
Quoted from Premier:After a few days of testing and adjustments, it was able to use acer 23.8, and its looks perfect
[quoted image][quoted image]
Aren't the tractor beams meant to line up with the ramps?
Looks squished horizontally.
When updating has anyone had the update start, then stop. Trying to figure it out with applejuice buy thought I'd see if it is a set up issue or something I'm doing wrong.
All original hardware (and 1.1 software).
In the box the leads were not connected to the proper pins so I rectified that.
Any ideas?
Quoted from sven:I did, the very first time. I did the following:
- reseated the connectors
- turned screen saver and power management off (standby and such)
- lowered the baudrate for the updating process
After that I haven't had a problem since with multiple updates, but I'm not sure if one of the above helped or that it was just coincidence.
Ok. I will try those things (some I have tried already)
Quoted from applejuice:My thought on this is maybe the internal pin2k serial cable is worn and only works at 9600 baud. Updates are done at higher speeds than this. So maybe I’ll have to reintroduce the lower speeds on the update app as options again
Ok. Perhaps we can try that.
Edit: would the internal serial cable wear if it's never been updated??
Quoted from Zee:If it's a poor-quality cable it can have transmission errors. Bad or missing shielding, etc. Remember it's in proximity to a high RF/EMI interference source - the CRT monitor, if you still have one in the machine.
Good point. Plus the heat factor if the fan ever failed.
Trying to find replacements but coming up empty thus far.
3 weeks later
I think my fan needs replacing as it makes a bit of a noise now.
Are most just replacing the small fan that is in place? Or doing as above?
1 week later
applejuice and I are trying to figure out an issue updating my RFM. Thought I'd reach out to the group to see if they have experience with something similar for a possible fix.
Here's what happens:
I start up machine connected to my desktop direct to the head with coin door open.
Once it starts I connect on the update program. Connects fine and can read all info no problem. Currently in version 1.11.
I click update software while set to lowest transfer speed. Blue bar appears on screen, the immediately disappears goes to grid screen then list updates in blue writing.
Then "Flash Failed" on program shows.
What I have tried thus far:
-Different leads including those sold by applejuice.
-replaced the flat cable in the computer for updating
-repeated all connections
-two separate computers
Any thoughts?
Prism card issue?
Board issue?
Quoted from Lithonion:First question is are you running the software as administrator? Right click exe and run as admin.
Have you tried updating from factory software? When I got my pin is was on 1.0. I updated it to 1.5 then I updated to applejuice's software.
Do you know anyone locally that has a RFM that you could put your prism board into to test and possibly update if the above doesn't work?
If the problem is the same on another pin, points to the prism board possibly having a bad rom chip.
Just my thoughts.
Will check that for administrator.
Any idea where to get 1.5 download?
Quoted from Lithonion:Can grab it here. You want the 1.5 - Program and Sound
http://www.planetarypinball.com/mm5/Williams/tech/pin2000/software.html
Beauty. Thank you.
Quoted from Lithonion:First question is are you running the software as administrator? Right click exe and run as admin.
Have you tried updating from factory software? When I got my pin is was on 1.0. I updated it to 1.5 then I updated to applejuice's software.
Do you know anyone locally that has a RFM that you could put your prism board into to test and possibly update if the above doesn't work?
If the problem is the same on another pin, points to the prism board possibly having a bad rom chip.
Just my thoughts.
Holy crap... something is happening with a few tweaks. 1.5 is loading.
You beautiful bastard I could kiss you if this works!
Quoted from Jeff1960:The art blades look great but I couldn't find them on the webstore. Was this a special order?
https://www.flylanddesigns.com/product/revenge-from-mars-art-blades-for-pinball-machines/
They are great quality as well
Lithonion thank you for your help.
A shiny new red heart next to your name as thanks!
Quoted from Lithonion:WOW, thank you. Totally unnecessary but thanks!!!
No... this has been going on for 3 months.
I REALLY appreciate it!
Quoted from ReadyPO:Might want to check the size on that - it is VERY small about 3X4 inches
I have the other one pictured, one of the best IMO but it is much more expensive...
https://abductionlamp.com/[quoted image][quoted image]
No I saw size.
Would be part of bigger display... at least in my mind.
Was playing the new code and had a crash during Martian bowling. Never had it happen on original code.
Machine basically did a hard reset.
Any idea if this is a setting issue, or something else all together.
(It of course happened during a fantastic scoring game!!)
Quoted from RC_like_the_cola:I believe it is a bug that's been in the game the entire time, even on original code. I think it has been mentioned in this thread a few times.
OK. Guess it is not something easily fixed.
1 week later
Any tips for a ramp that won't drop back down?
Was staying up at times before and one hit would get it all the way down. Now it stays up and won't return.
I've seen varying info about replacing or oil.
Thanks.
In my research on pinside I came across this post from last year.
Anybody install this?
https://pinside.com/pinball/forum/topic/revenge-from-mars-ramp-bracket-lighting-kit#post-6945639
Quoted from RC_like_the_cola:In my opinion, adding light to that area kills the effect of the graphics on the glass.
Hence my question. Wondered if it does indeed change the viewing of the hologram.
1 week later
Quoted from Grauwulf:Just out of curiosity, what would it take to set up and run a tournament server for RFM? I'm not super well versed on software, but the thought of doing it is intriguing.
Thanks!
There is something to that effect on the Mypinballs site. Not sure it's active though.
applejuice maybe can shed light on it.
Quoted from bob_e:Check your local glass shops, I last paid under $30 per sheet. Call around some places may be 2-3 time that. The local chain Henderson's had the best price here in S.E. MI.
But can a local shop do the ones RFM requires for reflection?
2 weeks later
Anyone replaced the red T-mold on the head?
Mine is looking pretty faded. Trying to decide if I want to keep it red.
Anyone changed it up? Black, Chrome? Red metallic?
Quoted from applejuice:Yes, mine is Martian green. Use the green from galaga cabinets
Was thinking green as well... do you have a pic?
Green looks great!
For the pennies it costs I may try it and go from there.
Thanks!
Also like the matching legs!
Quoted from GILV:Please be patient with me, I'm a dumby on a computer.
If I download on my Windows 10 , how will I transfer the files on the RFM afterwards if I don't have a Null Modem connector on my computer?
There are USB to Null modem cables you can get.
https://www.amazon.ca/gp/product/B0769FY7R7/ref=ppx_yo_dt_b_asin_title_o08_s00
Quoted from GILV:What's "thumb Drive" ?
Thumb drive is a USB Memory stick.
About to rebuild my skip ramp.
Saw folks mention adding a spring in. Anyone have a recommended spring size?
Quoted from RC_like_the_cola:Cleaning and a new sleeve is all mine needed. File any burrs off the plunger.
Ya. Got a new sleeve, new plunger and new skip ramp.
I can see how a spring would help it snap back though.
1 month later
So I've had the 6 ball trough kit sitting for a bit.
Got scared off by the need for soldering the optos.
How difficult for a beginner is that?
Quoted from themotherbrain:Just buy a set if you aren't comfortable. These are what you would want here.
https://www.pinballlife.com/trough-opto-transmitter-receiver-board-set-6-ball-for-williamsbally-pinball-machines.html
Good to know.
Guess I can try and if I f up it's only a $20 fix!
1 month later
Quoted from Lithonion:In case anyone didn't get the email about the new translite. Just ordered mine!!
https://www.flylanddesigns.com/product/revenge-from-mars-alternate-translite/
[quoted image]
Beat me to it
1 week later
Quoted from TheClownpuncher:Install the mypinballs code and you won't have the issue.
Nope.
Still happens with new code.
1 week later
Quoted from Zitt:Daymn... You shoulda come to Frisco for Texas pinball festival.. we woulda bought you a beer or three.
Have fun. Enjoy.
Do Brits drink?
Quoted from Irishbastard:Love the new translite!
[quoted image]
I was on the fence... but I Really like the look of it here...
Dang it... there goes more cash!!
1 month later
Quoted from TicTacSeth:Ha, me too, I have all the parts, just not installed it yet. Winter project, let’s do this!
I have the trough.... sitting in a box.
1 week later
Dang it.
Went to buy myself the new translite and looks like they are sold out!
Do they do new runs or is it a gone forever type of thing?
Quoted from Zee:Was this the 3D lenticular one, or the regular version?
Regular
Quoted from GILV:Thanks for the heads up.
Then, back to my first post: They do new runs because it was sold out a month ago as well and there was a new run about a week after. they just sell very quickly and I think they can't keep up with the demand.
I'll keep an eye out.
Trying to make it the nicest RFM out there! lol
Thinking about making some changes to the armor... perhaps martian green... Not sure yet.
Quoted from GILV:Green should look great.
Here's a topper I made for mine.
I've got both Pin2000 games for one cabinet:
[quoted image][quoted image]
Nice. Which gets more play?
I already did the T mold in green which looks great.
Thinking legs in green to match and maybe lock bar and metal moldings/speaker around the translite.
Quoted from GILV:They both get as much play....I love them both, RFM is fun, funny and deeper, but SWEP1 is fast and furious and is'nt easy to get to the JEDI spirit combat, I only got close twice, never got to it....
Do you want to powder coat those metal parts? I think it would look great, according to my imagination of course.
Ya... powder coat for sure
Question for those that installed 6 ball trough.
I installed mine and I now get three balls for every ball.
I tried reseatting the connections and nothing.
In set up menu I enabled 6 ball trough.
The opto boards are brand new 6 ball trough optos (as I don't trust me soldering skills).
Anything I missed??
Quoted from applejuice:Have you added the extra wiring to the trough boards connectors correctly as per the instructions? Pics of how you have it installed would be useful.
16699191170043446948960487886084 (resized).jpg16699191357963152766907379261763 (resized).jpg1669919149066524957613895469201 (resized).jpgQuoted from Zee:The black cable wires look like they are not punched down enough in their connector - no continuity.
Not done them before.
Best way/tool to push them in?
Quoted from Zee:You need the right tool for the job.
https://www.actionpinball.com/parts.php?item=13-3504
Ah... I see
Thanks!
Quoted from Irishbastard:Curious, which one? Maybe I'll add it to my collection as to avoid the, "Your not using the right tool!" Mafia...
WESTONETEK Punch Down Impact Tool with 110 and 66 Blades, Network Wire Cable Cat6/Cat5e Telephone Impact Terminal Insertion Tools https://a.co/d/etN09Ge
I used that one.
The recommended one would have come to over $100cdn... and is quite literally a one time use in all likelihood.
Quoted from Coyote:I believe that last one should actually be "1R" and not "1L". So "3R, 1L, 1R". That's how it is on WPC95 games at least. The last alternate single press is used to indicate that you're "finished" entering. (Both is how you tell the game "okay, I'm starting".)
Strange.
It doesn't seem to do anything.
What us supposed to happen?
Quoted from Coyote:Honestly don't know - I never knew about this code on RFM before, so never tried.
Keep in mind, the code MAY be dependant on a certain version of software, or do something 'hidden', like activate a special animation that will play the next time you make a certain shot..
True. Could be code dependent
2 weeks later
Because I enjoy throwing money down a hole...
Has anyone added under cabinet lighting?
Thinking a nice green undercab light would look great.
Quoted from Jeff1960:Pinbox works as eventually it should happen that the original craps out.
I am by no means as educated as well as some people here as far as repairs but if I can do it so can you.
Where does one source a pinbox?
2 weeks later
Quoted from Matt08:I have blue, according to the blue abduction light of the topper
[quoted image]
Nice.
How'd you hook it up?
Just stock LED strip lighting?
2 weeks later
Ok.
Who has installed cliffys?
I can do the one at ball eject into shooter lane no problem...
But SOL hole... I'm not sure how to get the post just behind to the left off. Never torn down the whole topside.
Quoted from hAbO:Underneath the playfield that post should have a nut to unscrew. Im not sure of the size nut-driver. Once removed the post can be removed by tapping it out with a screwdriver. I cant remember if I took the top plastic off or not while installing. You can do it. Its not too difficult.
Ok. I must be looking at the wrong one. Looks like a t nut anchor.
Will look again.
1 week later
Quoted from mark532011:I saw a nice little lamp that looks like it would make a great topper for RVM. It’s a bit expensive but…..
https://abductionlamp.com/products/the-alien-abduction-lamp
If you scroll back a few have done just that with the exact lamp
Quoted from brian-allen:Hey everyone, wanted to re-share this alternate Translite and Side Blade set I created.
Last time I posted about this, I didn't have any photos of them on the machine - here are some that a customer sent me.
Been really pleasantly surprised how well these have been doing - I didn't realize there were so many RFMs out there - thought it was going to be more of a niche thing.
We are restocking right now - if you'd like a Translite or Side Blades, please visit
https://www.flyland-arcade.com
THANK YOU!
[quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]
I have both and they look FANTASTIC
1 week later
Quoted from Pinfidel:Awesome RFM Topper?
RFM is a great game. I miss mine.
That said, I was looking for something on Amazon and came across this awesome alien thing that is PERFECT for RFM as a topper or game room decoration. I just thought I'd share it with everyone in case someone might want it before they're gone.
To find it, copy and paste this into theAmazon search bar.
UFO Cow Abduction: Beam Up Your Bovine (With Light and Sound!) (RP Minis)
They're only $12. For that price, get 2 and take the cow out of one and replace it with a car. It actually pics up the cow via magnet! Lol So cool!
Would be awesome if someone could wire it up and connect it into the game and have it be interactive.
Anyway, just thought I'd share it with my old fam. = )
[quoted image][quoted image][quoted image]
I have it.
It's pretty small but will work well in a bigger display with a background.
Quoted from GILV:How tall is it?
I think under 6 inches... it's packed away at the moment
Quoted from GILV:That's funny, I see your location and I was in Burlington ON. exactly a week ago to pick up a SWEP1 for a friend.
Really?
I never saw one pop up
Quoted from GILV:It was on Kijiji only, maybe that's why you did'nt see it.
Dang.
Good price?
Quoted from applejuice:Working on some new hardware features for v2.60 . Physically lock those balls for multiball..
Also adding some shaker effects, specifically mothership mb
[quoted image]
So this will be an add on mechanism? (Like the 6 ball trough/shaker)
Quoted from Zee:There's an aftermarket scoop for that with slotted mounting holes so you can change the "aim" of the thing.
https://mantispinball.com/product/revenge-from-mars-scoop/
The green one listed below that.... is that a replacement for the part above the playfield??
Quoted from Zee:That looks like the one in the back of the playfield that puts the ball onto the right plastic ramp.
Right.
Totally unnecessary to replace that one...
so I'll likely get it at some point.
Quoted from Zee:I recommend leaving it flat black so as not to mess up the video projections.
Good point.... but doesn't help my need to throw money down the hole that is pinball ownership.
2 weeks later
So I was watching a video for gameplay strategy and I noticed in one of them that they triggered Attack Mars after completing only 3 "missions", I assume that is a setting you can flip on? Is that right? (I ask as I have yet to trigger it despite almost completing all 9 missions... my best shot was when I had 1 ball to get to the mystery mission... only to get alien bowling and have it crash! 
)
Quoted from applejuice:I try my best. Its mainly just a lot of hours and graft!
Its number of saucer lights not number of modes
Good to know... I guess I suck. Lol
Quoted from Nickz4860:Reseated the prism card, no problems since. Last night I decided to try an update from 1.4 to 1.5. I was able to do this successfully using the fupdate and the computers command prompt.
I did some more research and found mypinballs, version 2.5. I’m trying to use the fupdate program with this code but am having problems.
Can this be done the same way I updated from one 1.4 to 1.5? I just downloaded the fupdate program and the game software and put them together on a flashdrive. With the computer plugged into the revenge from mars, Is there a certain command prompt I should be using to start the process? Thanks for any info!
You could buy a license for applejuice software installer and monetarily support his efforts
Quoted from Nickz4860:Sorry for the triple post! Was trying to edit and ended up replying to my own post.
No idea with apple.
applejuice is responsive if you reach out though
1 week later
2.50 incoming!
Thanks applejuice
16800279405484358276068089879078 (resized).jpgQuoted from GILV:WOW! I love that green T-molding. Very nice.
Actually stole the idea from applejuice.
Thinking about powder coating legs, lockdown bar and maybe speaker grill and top metal moulding the same colour.
16800323140325588729891346327317 (resized).jpgQuoted from applejuice:Yes, I have green t-moulding and matching green power coated legs. Everything else factory. Too much green would be wrong, but this is just right.
Legs and lockdown bar are where I'm leaning. Think you're right about the speaker grill and the top bracket though.
Question regarding the new code. When I play a multi player game the stroke of luck will select REDUCE SCORES every time for the first 3 or 4 times. Is this purposeful?
Quoted from applejuice:Only if the score war setting is on in the party options.
Found it! Thank you!!
Do you know the answer to my other question about the "Title screens" with the pictures as shown above? I don't see them.
Quoted from applejuice:If you don't see title screens then you have an issue I've not seen before. Graphics roms maybe? is it original or emulated hardware you are using?
Original hardware.
Quoted from Nickz4860:The “title screen” will show for a second or two after a mode is selected at the start of a game. They also should show after completing a mode and moving on to a new one.
Yup... never seen them...
Quoted from Zee:Do you hear the sound call associated with the mode title screens? Like "Big-O Beam!" with the music?
Nope.
Quoted from RC_like_the_cola:My first thought would be to remove and reseat that mask rom. Maybe shoot some contact cleaner into the socket while it is out. I don't have direct experience on the prism card, but it has worked on other roms where they were not reading right due to a dirty or bad socket.
I'll give it a try.
Anyone have tips or cautions when doing this?
Do I need a separating tool for prism card?? I thought I recalled seeing that in the past.
Quoted from hAbO:Looking for a right ramp and lockdown bar if anyone has them.
Thanks
Saw it listed here for 3D printing if you can't find one.
https://thangs.com/search/Pinball%202000?scope=all
Ok I tried reseatting the ROMs. no change. Still testing bad.
If I buy programmable ROM's... anyone know where or how to program them?? Or would it be done with an update?
I'm clueless here.
Quoted from RC_like_the_cola:I would check with Dave at pinballrom.com. He likely knows what the EPROM equivalent would be, and should be able to program one for you.
even better! He's just up the highway from me!!Thanks... should have thought of him!
Quoted from GILV:I'm sorry to say this but I've tried finding these but nobody can burn them I've asked two guys, in Ontario who do burn ROM'S and they both said they could not do them......, you can only get original factory ROM's and they rare rare rare.....
I just sold a set 2 weeks ago, I had 2 back ups so I sold one of them, too bad
https://pinside.com/pinball/forum/topic/rfm-nos-rom-s-
Dang it.
Nucore may be the next best option.
I saw those... doesn't specify they are tested though.
I guess for $40AUD with shipping it's worth a risk though.
Quoted from GILV:Maybe you could buy those and get them burned Canuc_pinhead ?
I bought them.
We'll see
Quoted from Nickz4860:How risky is it to “disable updated code” I read that there is a chance it will be stuck on an early version. I am getting an error,“Masked ROMs (V100,V101) checksum bad”
I decided to try to reinstall mypinballs v2.5, it said “FLASH Update complete” but it also said “MASKED IMAGE BANK (0) MISMATCH” on the same screen before the machine reset itself after the update. Still getting the same “checksum bad”. I saw the v101 ROM for sale. I’m wondering if that would be a simple fix?
I finally decided to buy a nucore replacement computer which should work perfect with my existing LCD conversion. I still would like to get the original computer error free
I have the same masked ROM errors (U100 and U101).
I was unable to find any new ones, but did order used ones from Australia... should arrive later this month and hopefully fix it.
4 weeks later
Quoted from paynemic:I got my rfm updated with a standard usb stick and applejuice excellent manual update instructions and roms. I swear I’m hearing new callouts. Definitely got the drop target hurry up (I think that’s new?).
Now planning on putting in the extended trough and his other cool add-ons. And maybe modding the auto plunger to allow permanent plunger attachment for swep1. Is it worth it?
applejuice any plans to update code on swep1? Do you have a playfield?
6 ball trough is awesome. Highly recommend adding it.
2 months later
I have a question in regards to what I need to adjust or fix...
The shooter seems weak... when the button is pressed it makes it to the top of the loop, but never to the far left into the lanes (if that makes sense). I recall that when I bought it it fired all the way.
The flippers also feel a bit weak at times.
Suggestions?
1 month later
Quoted from hAbO:I’ll recheck the permissions.
I had similar issues in the past on WIN10, Had to run the program as administrator to get it to work.
1 month later
Quoted from mattosborn:What you have pictured is correct (mix of flat and 3D).
Ok. Perfect. Thank you.
Quoted from Zee:I made all 3 targets the 3D type on mine. Looks better that way.
[quoted image]
I may do the same.
Easy swap out?
Quoted from erikie:Working on it
Runs on my own machine now and played ~50 games on it. No issues.
Code is not yet final. Working on the network interface at the moment.
This code will emulate the DCS also so no hardcoded sound in mp3 format anymore.
Will this be something you run off an old PC or using the existing computer?
3 weeks later
Quoted from KING-HENRY:just wondering if anyone has experienced crashes on the 2.5 update...my machine was updated a few weeks ago, with about 20 or so games on 2.5. Yesterday I turned it on, started a game on 'Mars Needs Women' and it crashed/froze, which is the first time the machine has ever done that. Turned off, rebooted, and it proceeded to crash again, but even faster (and monitor blanked out with green lines)..FIRST, I will be reseating the prism card, and all connections and try again..Just wondering if I'm alone on this or not..any input or XP on this would be appreciated
Nope.
No crashes outside the known issue with Martian Bowling.
Quoted from Lithonion:So happy to get rid of that horrendous electronic knock sound.
[quoted image][quoted image]
I avoid it by being bad at pinball
4 weeks later
Quoted from applejuice:A few things to finish up before the xmas break.
First up, a new version of the updater software is out today v1.0.7
Head to https://www.mypinballs.com/software/pinball2000/software_updater.jsp to download. If you have an installed version already with an active licence then this version is a free update. If you need to install it on a new computer then its not free.
Rev notes here:
https://www.mypinballs.com/files/pin2k/pin2k_updater_rev_notes.pdf
[quoted image]
Old one will still work though?
Fixed a target and now I have a new issue.
I can not trigger capture or hit aliens in the middle lane. Not sure where to look first. Switch maybe?
Any direction appreciated.
Quoted from BlackBelt:Difficult with the glass off (reading backwards and upside down) but go into switch test and touch all the center switches to see if they register…if not adjust the spacing on the leaf switch…had this same issue with mine (center target not registering) and after a quick tweak is was great! I did have to remove it from the underside to adjust…so prepare for that.
All the targets register.
Think it's the rollover... not sure how it just stopped though.
Also not sure how to fix.
Quoted from BlackBelt:I believe there are also a few magnetic switches under the pf (center loop)…might check those by rolling a ball through the center loop shot in switch test.
Nothing registers.
If I used a magnetic screwdriver... would that do something?
Quoted from GILV:Which roll over switch does not register?
What target did you fix before the issue came up?
Maybe a wire broke while you were fixing without noticing?
Nothing through the middle lane registers.
I replaced the small stand up target next to middle lane. It registers.
No wires look to be free.
Quoted from GILV:Those are called reed switches, I think there are 2 reed switches under the middle lane, you need to roll a ball over those switches to test them.
Maybe you soldered the wires on the wrong lugs and it causes the reed switches to not register anymore.
Can you post a picture of the stand up target you replaced?
The small stand up.
Do I run a switch test while rolling ball over?
17034475807922077487670618078298 (resized).jpgQuoted from BlackBelt:Midnight
Guess the clock on the machine needs checking... as it certainly wasn't midnight
1 month later
Quoted from wayout440:It's Pinbox but I'll have to check the number. The main differences I see was the new characters added to Big O Beam and the quick hit saucers.
I believe he's referring to mypinballs 2.xx versions
Quoted from applejuice:Well then, what do we have here...
[quoted image]
Its new hardware time!!
Can someone more knowledgeable tell me what it is?
1 week later
Quoted from Giulio:Hello, my RFM plays well as far as I can see, no issues (also on sounds), but I did try a roms test and I got this error and do not know what to check. I'm on 2.24 code. Thanks!
[quoted image]
I have the same.
Bought new ROMs... still bad.
Only thing I notice with mine is I don't have the large graphics while selecting the game at start up.
3 weeks later
I had issues getting mine to update.
The simple solution ended up being I had to right click "Run As Administrator " for it to work.
2 weeks later
Quoted from Willy39:So within the last few months I been having a random problem that happened twice on me. During gameplay with no rhyme or reason, the game completely locks up on me. The playfield goes black and basically has no power and the display screen with an gameplay image on it locks up. If I power if off and on again, it works fine! This problem has only happened to me twice in probably the last 30 or so times playing it. Any ideas whats going on? Thanks!!
Is it during Martian bowling?
Quoted from Willy39:The first time it was, but this last time it was at the end of multiball right after destroying the big saucer.
Martian bowling is a known issue. Crashes happen there.
But not heard of it in other modes
Promoted items from Pinside Marketplace and Pinside Shops!
Milan, PA
You're currently viewing posts by Pinsider Canuck_pinhead.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
