^^^ Highly recommended.
The new speakers really sound nice. I never heard the old ones in my machine because I tore it apart the second I walked in the door. But these sound great.
Installing the new ones (as recommended in the thread) required some work. For starters, the speakers are yellow. So, I took them and sprayed them with the metallic black fleck paint that I painted the rest of the hardware with. Anyone can spray paint them with a spray can. I recommend using a flat black spray paint as it will help to conceal the speakers. Flat means no sheen/shine in the paint.
Also, the speaker grill no longer fits on the machine. You won't be able to screw the 3 lower torx security screws into the magnet shield. The inside top lip of the grill was hitting the curve of the speaker. I took out my Dremmel with a cutter blade and I notched out the grill some more. After I did that, it fit right in.
Lastly, do NOT use the supplied speaker screws. They are too long and will go through the speaker panel. You don't want that. I used some small stainless steel screws and painted them as well. You can do the same with the spray paint. Just get a piece of cardboard and pop the screws into it. That will hold the screws up for you. Then you can give them a couple of nice coats of paint. If you should scratch them after you screw them in, take a cheap paint brush. Even a kids paint set brush is fine. No brushes? Use a tooth pick. Take the brush or t-pick and spray paint the end of it. Then dab the head of the screw with it and it will look perfect again.