Got a rfm with episode 1 kit. As episode 1, game boots and plays fine. If I plug in the half of the rfm prism sandwich with chips and rfm playfield, the game goes into a boot loop. The initial pin 2000 screen comes up, the loading screen comes up, the playfield lights flash.... and then it reboots. I never see any rfm graphics on screen.

I think I’ve narrowed it down to the rfm chips. I’ve swapped the chips onto another prism card half and it does the same thing.

Anyone have some chips I can buy, or any other insight?

Thanks
Mike

I have a second chip half of the sandwich, with the rfm chips on it. When I’m switching from e1 to rfm I’m switching the entire half. In other words I have two chip halves, one with rfm chips, one with e1 chips. I still have to do the update process above?