Quoted from harryhoudini:I'm assuming that is what was done here, but where do you get the decals? The only stuff I've seen is the full vinyl wrap. I mean, I guess you could cut the art out of the background. But is there a service or way to get just the art to apply and clear over it? Because all I have found are the full cabinet wraps for like $300 and I know I'll screw that up.
I scanned my cabinet and cut my own decals. Had three layers red, yellow and white over a black base.
Uh.... yeah, so can you share that? Because I have no way to scan my cabinet! ... maybe want to sell me a set? 
Quoted from harryhoudini:Uh.... yeah, so can you share that? Because I have no way to scan my cabinet! ... maybe want to sell me a set?
I'd be willing to send you the scan files. Not terribly interested in cutting them tho. Id have to order more vinyl, these decals are very wasteful... You are essentially cutting each color to the full width and tossing all the black areas.
It was a bit of a challenge to install them, I did it wet. If I were to do them again, I'd get some wide transfer tape and assemble colors off the cabinet.
Thinking about it more, I would try stencils like Pinball Pimp does.
Quoted from kcZ:I'd be willing to send you the scan files. Not terribly interested in cutting them tho. Id have to order more vinyl, these decals are very wasteful... You are essentially cutting each color to the full width and tossing all the black areas.
It was a bit of a challenge to install them, I did it wet. If I were to do them again, I'd get some wide transfer tape and assemble colors off the cabinet.
Thinking about it more, I would try stencils like Pinball Pimp does.
Ahhh... yeah, I'd have to get them cut since I have no way. I assumed you used transfer tape, but I guess wet is an option. Still contemplating going with the full decal.. wondering if it might be worth it to cut those out.
Quoted from harryhoudini:Ahhh... yeah, I'd have to get them cut since I have no way. I assumed you used transfer tape, but I guess wet is an option. Still contemplating going with the full decal.. wondering if it might be worth it to cut those out.
PM heading your way.
Quoted from Completist:Earthshaker - since my ES head has a piece of wood cut out of the side... 'Drill a lock out? no way - we'll cut it out with a chainsaw!'
I emailed him about earthshaker the day I saw these 5 months ago. I also asked about other things so ignore the prices.
Hi, the combo would be 1299$ shipped, so the decals would be 300$. If we put in the earthsaker same time they would be 300$ as well. But right now I do not have the files, but I will ask rick for them. Looks like he has them. Only thing would be that I would need you help to measure the dimensions of the cabinet and position of the buttons as I do not have a cabinet....
Regards,
Mirco
That's the response I got. So looks like it can and will be done.
What is everyone doing with WPC games and the large playfield bolts on the sides just cutting them out and installing like normal? I already have a set for my Totan restore and am going to install then soon but wasn't sure if people were recessing them into the cab maybe with T-nuts and installing the decal over them.
I cut mine and put the bolts thru. If you put the decal over and you ever have to get to those bolts your screwed.
Quoted from CaryCarmichael:I second Shadow.
Thanks!
I third Shadow
Creature is in preparation. As well as many others. But I have no free machine time in the next few weeks so new projects have to wait a little. Sorry for that! This is also delaying more new playfield titles. I will get another router in 4 weeks which will add more capacity...
Regards,
Mirco
Quoted from cougtv:I hope one of those in preparation is no fear?
No Fear would look good!
I know that we have files for slugfest but I would need help with the cabinet dimensions as i do not have any cad files for that. I can work on that maybe in September.
Regards,
Mirco
Quoted from BertoDRINK1:Radcals installed on our Totan restore, very shiny.[quoted image][quoted image]
Could you please post some more pictures of TOTAN? Maybe some
Better lighting?
Quoted from Toppers:Could you please post some more pictures of TOTAN? Maybe some
Better lighting?
Don't Worry, Since I am the restorer, I will be posting some wonderful Photos in a few days when all is completed!!
Look here and www.pookiespinballs.com for photos.
thanks
perry.
Here are Black Knight 2k Rad Cals installed
9CC426D7-9B6C-413D-84A3-087DEE0884E0 (resized).jpeg329E7202-C65D-4238-9AD9-88D934238F29 (resized).jpeg33A5FAAB-24E8-4C41-ADB3-903AC3705241 (resized).jpeg6EE0CF29-4C89-4A90-A036-025948D797D9 (resized).jpegB9C4C136-A43E-4E7E-A262-524FE0BE0E10 (resized).jpeg0BF15847-69E4-4671-8040-ABB2B5A6E40F (resized).jpegD51A0EA1-9762-4D1B-BA92-3705E7DCABA6 (resized).jpegQuoted from Highclasspinball:I know that we have files for slugfest but I would need help with the cabinet dimensions as i do not have any cad files for that. I can work on that maybe in September.
Regards,
Mirco
Slugfest? That should be last on list until many more popular needed are done. Shadow for example.
Quoted from woody76:Slugfest? That should be last on list until many more popular needed are done. Shadow for example.
SlugFest baby!
Quoted from PtownPin:SlugFest baby!
Hey I love slugfest but come on
Quoted from woody76:Hey I love slugfest but come on
we all have selfish interests....
Here are the TOTAN ones I promised everyone. Feel free to browse website for other images at
www.pookiespinballs.com.
Radcals and all!!
DSC_5795edit1 (resized).jpgDSC_5799edit1 (resized).jpgDSC_5809edit1 (resized).jpgDSC_5872edit1 (resized).jpgQuoted from Dantesmark:The getaway?
+1 Getaway Please!
Thanks for posting these great cabinet pics! They look gorgeous!
Gateway would be possible if we get at least 15 people together. The problem is that we need to burn screens for the neon which makes it much more difficult and expensive.
Regards,
Mirco
Quoted from underlord:Any IJ updates? I’m terribly excited and trying to be patient!
Me tooooo
Here is a custom BOP we have been building with the 2.0 Kit.. Using the same process
Looks amazing!
IMG_1588 (resized).PNGIMG_1589 (resized).PNGIMG_1590 (resized).PNGQuoted from joeraptor2003:Here is a custom BOP we have been building with the 2.0 Kit.. Using the same process
Looks amazing![quoted image][quoted image][quoted image]
These rad cals are pinball porn. I could just stare at them all day. Or until I finish. Whichever happens first. 
Quoted from dr_nybble:Any techniques for handling the square cut-out for the carriage bolts?
So I used a 1/4" Forstner bit for small bolts in the head and 3/8" Forstner bit for the larger bolts. It worked well, very clean cut and the bolt heads are large enough to easily cover it. I hand-turned a brad-tip bit from the inside until it poked a tiny hole in the Radcal to mark the hole center.
The Radcals go right to the edge of the head. Corners should be repaired to be sharp if they have been damaged at all. If you have a chamfered edge the Radcal may reveal slightly so place them carefully.
Very happy with the colour on the BSD Radcals, so much better than the other decals I had obtained.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/revised-rad-cals-for-many-more-wms-games/page/4?hl=freeplay3 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Waterford Township, MI
Vernon, BC
