Revenge From Mars
Bally, 1999You're currently viewing posts by Pinsider mattosborn.
Click here to go back to viewing the entire thread.
Quoted from awarner:In your first picture of the back of the header pins, just pull that plastic off of the bottom of the header pins. Get a knife or a flat screwdriver and get between it and the PCB and just remove it. You'll see the solder pads then.
That's a single-sided PCB... the pads are on the other side. Just pull the connector off to see the solder.
You're currently viewing posts by Pinsider mattosborn.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/revenge-from-mars-your-advice-appreciated?tu=mattosborn and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Derry, NH