Revenge From Mars
Bally, 1999You're currently viewing posts by Pinsider Borygard.
Click here to go back to viewing the entire thread.
You likely unseated the parallel cable from the driver board to the computer, somewhere along its path.
Or, it needs to be replaced.
All of your symptoms point to the computer not communicating with the driver board.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
Again, your symptoms are consistent with a communication issue between the computer and the driver board.
Could be a loose or bad parallel (not serial) cable between the computer and driver board. Could also be an issue with the motherboard, or the driver board.
From your description of how this began, I'd say your driver board is damaged, if you've ruled out the parallel cable.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
No. If there is no communication between the two, the fuse reporting, and the HV fuse LEDs will not function.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
You're currently viewing posts by Pinsider Borygard.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/revenge-from-mars-power-board-issue-help-pls?tu=Borygard and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St Louis, MO