I have two separate errors or problems with my Revenge from Mars that I cannot figure out.
1. "Fuse F109 is blown T4.0 250v": this seems to happen a lot and despite replacing it with the proper T4amp fast blow fuse many times, it keeps blowing out. It believe it's associated with a flashers near the center of the PF, and I have taken the bulb out. The flasher connector wires look okay, and tracing them out did not detect anything. Any ideas would be appreciated?
2. "Lock diverter remains open": The solenoid test is silent on "38. Lock Diverter Hold"; F106, J112-6. The metal diverter is a single blade version. I read a previous thread which stated that it's either the wrong metal diverter blade or a spring in the coil assembly.