What is the voltage measurement you get on the other side of R114 ?
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Quoted from EastlakeMGM:I'm also not getting 12V (getting nothing) at the DMD. It tests fine on both boards. Any ideas?
This seems correct for Sega games not getting 12v at the DMD. I remember Harley Davidson was the same way.
To me, it seems you have an issue elsewhere. As pinwiki means, the Game ROM IC socket can be an issue. Press on the Game ROM and the RAM next to it to see be sure they are seated well in the sockets. Can we see a picture of your CPU board?
Quoted from EastlakeMGM:I get 5.1V on one side and 1.7V on the other
So with Pikiwiki stating... The best location to measure the +5VDC is at the bottom leg of resistor R114. R114 is located in the vicinity of the R116 adjustment pot, and just below the +5VDC LED,
The bottom leg of the resistor R114 bound to be where you are measuring the 5.1v since it is getting to the CPU board, especially with both driver boards doing the same thing. Issue seems to be there on the CPU board.
You're currently viewing posts by Pinsider PinballManiac40.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/resets-on-swt-low-5v?tu=PinballManiac40 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.