Hello everyone, I have a 70 Aquarius that I have to manually reset the control bank reset bar otherwise the score motor continuously runs. I've had the machine for about 5 months and has worked great until moving and it slipped off the dolly and dropped about 5" to the concrete. It actually worked after that for about 6 games and now the coil on the control bank doesn't seem to get energized. I have checked for broken wires, fuses, relays but can't find the problem. I have the schematic but I'm pretty lost reading it. Any help would be great appreciated.

Thanks,
Jim

That's what my schematic looks like Woz. Thanks for the advice Howard. I'll give that a shot.

The SB armature and SW seem to be opening and closing as they should and I am picking up some new fuses later today to give that a try.

Solved the problem. It was the SB armature wasn't making contact. Originally I took a picture of it opening and closing but after removing from the board I could see a very slight gap (actually couldn't really see it as it was so slight). After adjusting it she fired right up.

Thanks again for the help!