Bought just now - thanks Vire for doing this!!
You're currently viewing posts by Pinsider npo.
Click here to go back to viewing the entire thread.
I just now installed one of these into my JP Pro as the stock fan sounded like I was waiting for a small private plane to leave the runway at my local airport.
PinMonk 's insructions are super clear and helpful. When moving the stock fans wire harness out of "the goop", I used an extended pair of small needle nose pliers (orange handled ones at HF) to pull on the goo while using my free hand to guide the wire harness through and around the goo. Super simple with no risk of damaging on board components to the power supply.
If you do this and reinstall in a "cold game" (game has sat overnight without being played) - be prepared to wait for the test moment a solid 35-40 minutes. I had a torn piece of a tissue on the box, and I waited easily that long with my living room at 70 degrees. Won't deny, I was starting to get a tiny bit nervous, but the product activated and did exactly as described. It vented the power supply box and turned off once the job was complete.
GREAT product - highly recommend!
You're currently viewing posts by Pinsider npo.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/replacing-stern-spike-noisy-ps-fans?tu=npo and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.