I need to replace the power cord on the 1963 Big Deal I’m fixing. I would also like to add a power switch, right now plugging the machine in will turn it on. I have replaced cords before but never added a Power Switch.
If you look at the schematic, would the new power switch go where the red arrow points? My plan is to ground at the transformer and then run ground braid to all the legs and coin door/lock bar per this guide.
Thanks
Alberto
0C23174F-A0A7-4967-971A-B0A00FD5D581 (resized).jpeg20C09108-2C3C-47B5-A99F-3D9A25C506C4 (resized).jpeg