(Topic ID: 157520)

Stupid Playmatic Style Connectors/Headers Modern Replacement

By ChanceKJ

5 years ago


Topic Heartbeat

Topic Stats

  • 30 posts
  • 9 Pinsiders participating
  • Latest reply 4 months ago by ChanceKJ
  • Topic is favorited by 3 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

IMG_0976 (resized).jpg
IMG_0973 (resized).JPG
IMG_0975 (resized).jpg
IMG_0974 (resized).jpg
50910856297_5b5d80f72f_o (resized).jpg
50910727776_f283542598_o (resized).jpg
50910036243_28547e47aa_o (resized).jpg
50910036238_0bc22169ef_o (resized).jpg
50910036213_d4239c670e_o (resized).jpg
50910036168_5c8f4ef795_o (resized).jpg
tmp_24175-20160418_095600-1-1580364284.jpg
image.jpeg
image.jpeg
image.jpeg
image_(resized).jpeg
image_(resized).jpeg

You're currently viewing posts by Pinsider G-P-E.
Click here to go back to viewing the entire thread.

#5 5 years ago

Interesting...
Are there any manufacturer part markings on the part at all? A logo or anything?
How about a pix looking into connector? Round pins on board?
Can you get an accurate measurement of pin-to-pin spacing using a micrometer?

#9 5 years ago

OK -- those appear to be 5mm spacing.
One more question -- what is the diameter of the pin? 1.54mm?

Ken's link is close but there is a series that has all the contacts at 5mm centers.

#14 5 years ago

1.55mm (0.062") pins with 5mm spacing is what I was guessing. But as the last poster stated, get an overall length of the longest connector on the board to see if this is really 5mm or 0.2" spacing (measure center of pin on one end to center of pin on the opposite end of connector).

For 1.55mm pins with 5mm spacing - my 'oddball' connector source has a version that goes to 6 pins in length only. But these would not look at all like what you have now - see link Ken posted for a similar connector (10/5 mm spacing).

For 0.2" pin spacing - all I can find are square pins. Available up to 20 pins long (like Molex SPOX). Again, these won't look like what you have now - these would look more like standard 0.156" plugs used nearly everywhere.

The problem with both of these alternatives - they are both much thicker than what you are using now. I'm sure the silkscreens would be partially covered and hopefully no interference with nearby resistors. Can you get any pins out without mangling it or the connector? I have a source that makes hundreds of crimp contact varieties, maybe we can find a close match.

4 years later
#22 1 year ago

Yeah... I would like to know what worked on that one.

5 months later
#26 8 months ago

OK - looks like standard KK156 series contacts and keys.
What pin counts did you use? I can see 2, 3, 4, 6 and 8.

2 months later
#28 5 months ago

When I can get there, this series will be available here:
https://www.greatplainselectronics.com/categories.asp?cat=216

You're currently viewing posts by Pinsider G-P-E.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside